Electrolux LAVAMAT 86810 manual Delay Start, Start in 4h, Starting a programme

Page 19

Delay Start

1.Press the TIME key repeatedly, until the DELAY START symbol flashes.

2.Press the OK key. “Start in 0 min” is shown in the display.

3.Press the TIME key repeated- ly, until the display shows the desired period by which you want to delay the start, e. g. “Start in 4 h” (=4 hours). A black bar appears under the symbol.

Delay Start

12.45

Start in 4h

18.37

aýýýýýaýaýaýaýaýaýaýKýT_

TEMP.

RPM OPTIONS

OK

TIME

3If 20 h is displayed and you

press the key again, the delayed start is cancelled.

4.Press the OK key. The display shows the DELAY START symbol and the time until the end of the programme (including period by which the start has been delayed).

5.To activate the Delay Start, press the START/PAUSE key. The display now shows e. g., “Start in 4.00” (==4 hours). The display for the time re- maining until the start of the programme is reduced in 30 minute intervals (e. g., 4.00, 3.30, 3.00, ... 0.30, 0).

LINEN/EASY CARE

12.45

Start in

4.00

50C 800

aýýýýýaýaýaýaýaýaýaýaýT

TEMP.

RPM OPTIONS OK

TIME

Starting a programme

1.Check that the water tap is open.

2.Press the START/PAUSE key.

The programme is started or it starts after the time delay set has elapsed.

3If after pressing the START/PAUSE key the display shows “Door not Closed”, the door has not been shut properly. Push the door firmly closed and press the START/PAUSE key again.

19

Image 19

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyCycle end at What is shown in the displayEasy Iron Program overviewUse/Features Care Symbols1 Programmende um Prior to using for the first timeN g u a g e R a c h ePreparing washing Setting the timePreparing and sorting washing Carrying out a wash programme prior to first useAdding detergent/conditioner Running a wash cycleWashing powder/tablets for the main wash cycle If you are using liquid detergent Switching on the appliance/selecting a programSpeed or Rinse Hold is displayed Changing spin speed/selecting rinse holdWith spin speed 0 the TEMP. RPM Options OK Time Opening the door/Loading the washing Max . loadCurrent load display goes out if the door is closed Sensitive Setting optionsSensitive PrewashingPrewash, Sensitive, Stain, Night Cycle Time Saving Short or Very Short Setting timesDelay Start Time savingStarting a programme Delay StartStart in 4h StartInterrupting a programme WashingProgramme progress Interrupting a programme/Adding washingIf Rinse Hold or Night Cycle was selected SetupWashing cycle complete/Removing the washing Memory 1, 2Memory Store program Setting the MemoryChanging the Memory Extra Rinse VolumeU n d N s e +Language Set timeClock Contrast and brightness Desired setting. WithEach press of the key or if Deactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerRemedying small malfunctions Clean the glass in the door and the rubber collar regularlyWhat to do if Door and rubber collarTap turned off Turn the tap on There are white residues on the washing If the wash result is not satisfactoryThere are grey stains on the washing Foam can still be seen following the final rinseCarrying out an emergency drain When the water has all drained awayDrain pump Packaging material DisposalOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationRemoving the transport lock Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the applianceRemove both plastic caps sideways Where to installAppliance If the appliance is to stand on a base Making the appliance levelElectrical Connection Brown Live Wire coloured green and yellowPermanent Connection Permitted water pressure Connecting the appliance to the water supply35m long pressure hose is supplied with the appliance Water inletWater Drainage From your Service Force CentreFor drainage into an outlet Pumping heights of over 1 metre Great Britain Guarantee/Customer ServiceLU4 9QQ European GuaranteeMagyarország +36 Major Appliances 0870 5 929Customer Care For general enquiries concerning105 176 Subject to change without notice