Opening the door/Loading the washing
1.To open the door: pull the handle on the door.
2. Unfold washing and load it loosely into the machine. Mix large and small items.
Attention! Do not get any washing caught between the door and the rubber seal.
3.Push the door firmly shut. Door catch must audibly click shut.
Current load display
3If settings are not undertak- en for several seconds during the programme setting proc- ess or when loading with
Max . load: | kg | 7.00 |
¢¢££££££££ | kg | 1.5 |
|
|
|
50C 800 aýýýýýaýaýaýaýaýaýaýaýa
laundry, the following indi- TEMP. RPM OPTIONS OK TIME cators appear on the display 
when the machine door is open:
–the maximum permissible load for the selected programme,
–and the actual loading in 0.5 kg steps. This is also displayed by the lit- tle filled boxes (loads of less than 0.5kg are not displayed).
If too much laundry has been loaded into the machine, the indicator OVERLOAD appears in the display. Please remove the relevant amount of laundry in such cases.
It is possible to carry out more programme settings.
3If the laundry is removed again before the programme starts, the cur- rent load display may not change back to 0. If this occurs, please turn the machine off and switch it back on again after approx. 3 seconds. Reset the programme and refill machine with laundry.
The current load display goes out if the door is closed.
15