Electrolux LAVAMAT 86810 Washing, Programme progress, Interrupting a programme/Adding washing

Page 20

Programme progress

The display indicates the stage of the programme that is currently being performed as well as the time to the end of the programme.

	LINEN/EASY CARE		12.45
	LINEN/EASY CARE		12.45
	Washing		14.37
	50C 800	aýýýýýaýaýaýaýaýaýaýaýa

	TEMP.	RPM OPTIONS OK	TIME

3 During the wash cycle the time to the end of the pro- gramme may change as the

programme adjusts itself to different conditions (e. g., type and quanti- ty of laundry, out of balance spin detection, special rinses, etc.).

Interrupting a programme/Adding washing

Interrupting a programme

•The programme can be interrupted at any time by pressing

the START/PAUSE key. It is then re-started by pressing the key again.

•To stop the washing machine before the programme has ended, turn the programme knob to OFF.

Attention! Be careful if there is water in the appliance!

Adding washing

1.Press the START/PAUSE key.

•If “Door locked” and “Pause” are alternately shown in the display, it is no longer possible to add washing, e. g. when the water level is too high.

•If “Door openable” and “Pause” are alternately shown in the display, it is still possible to add washing:

2.Open the door.

3.Add washing and close the door again.

4.Press the START/PAUSE key again. The programme continues.

20

Image 20

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationSafety Prior to using the appliance for the first timeChild safety Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardWhat is shown in the display Cycle end atProgram overview Easy IronUse/Features Care Symbols1 Prior to using for the first time N g u a g eR a c h e Programmende umSetting the time Preparing and sorting washingCarrying out a wash programme prior to first use Preparing washingWashing powder/tablets for the main wash cycle Running a wash cycleAdding detergent/conditioner Switching on the appliance/selecting a program If you are using liquid detergentWith spin speed 0 the TEMP. RPM Options OK Time Changing spin speed/selecting rinse holdSpeed or Rinse Hold is displayed Current load display goes out if the door is closed Max . loadOpening the door/Loading the washing Setting options SensitivePrewash, Sensitive, Stain, Night Cycle PrewashingSensitive Setting times Delay StartTime saving Time Saving Short or Very ShortDelay Start Start in 4hStart Starting a programmeWashing Programme progressInterrupting a programme/Adding washing Interrupting a programmeSetup Washing cycle complete/Removing the washingMemory 1, 2 If Rinse Hold or Night Cycle was selectedChanging the Memory Setting the MemoryMemory Store program Volume U n dN s e + Extra RinseClock Set timeLanguage Each press of the key or if Desired setting. WithContrast and brightness Child safety device Deactivating the child safety deviceCleaning and maintenance Cleaning procedureDetergent dispenser drawer Washing drumClean the glass in the door and the rubber collar regularly What to do ifDoor and rubber collar Remedying small malfunctionsTap turned off Turn the tap on If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Old appliance DisposalPackaging material Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inInstalling the appliance When using a sack trolley to transport the washing machineTransporting the appliance Removing the transport lockAppliance Where to installRemove both plastic caps sideways Making the appliance level If the appliance is to stand on a basePermanent Connection Brown Live Wire coloured green and yellowElectrical Connection Connecting the appliance to the water supply Permitted water pressureWater inlet 35m long pressure hose is supplied with the applianceFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Guarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQMagyarország +36 0870 5 929 Customer CareFor general enquiries concerning Major Appliances105 176 Subject to change without notice