Section 11: maintenance
Lubrication
Daily
•Check the level of hydraulic oil in tractor before starting each day’s operation. If necessary, add oil as recommended in your tractor owner’s manual.
IMPORTANT: When adding oil to the tractor reservoir, always use hydraulic oil as specified in the tractor operator’s manual.
•Lubricate after every eight hours of operation (See
Figure 30):
-Apply lubrication to the grease fitting in the hub at the mast end (rearward end) of each boom arm.
-Apply lubrication to the grease fittings at the each end of both boom lift cylinders.
-Apply lubrication to the grease fitting in the hub at the upper end of each bucket cylinder.
-Apply lubrication to the grease fittings in the outer end of all four pivot pins of the loader bucket.
General Maintenance
After every eight hours of operation, check all hard- ware and tighten where required.
Replace hoses immediately if they are damaged by a cut or scrape, extruded at the fittings, or leaking. Hydraulic oil leaks should be repaired promptly to avoid loss of oil and serious personal injury from escaping oil.
LUBRICATION
Figure 30
23