section 2: labels found on loader
777D11455
(QTY 2) 777D11290
On Both Sides
777D11356
(QTY 2) 777I22850 On Both Sides
BUCKET LEVEL
REFERENCE POINT
Model Plate
777D11357
777I22804
| FLOAT |
|
DOWN & | 3 | DOWN & |
CURL |
| DUMP |
| DOWN |
|
1 CURL | N | DUMP 2 |
| UP |
|
UP & | 4 | UP & |
CURL | DUMP |
READ OPERATORS MANUAL BEFORE OPERATING
777S32188
WARNING
1. READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE OPERATING.
2.KEEP OTHERS AWAY WHEN OPERATING LOADER.
3.DO NOT ALLOW CHILDREN OR UNTRAINED PERSONS TO OPERATE EQUIPMENT.
4. LOWER LOADER TO GROUND, STOP ENGINE, SET PARK BRAKE AND REMOVE KEY BEFORE LEAVING TRACTOR SEAT.
5. FAILURE TO FOLLOW SAFETY RULES CAN RESULT IN
SERIOUS INJURY OR DEATH. INSTRUCTIONS
ASSEMBLY FOR FRONT END LOADER
1.PARK LOADER ON FIRM LEVEL GROUND.
2.SLOWLY DRIVE THE TRACTOR CLOSE TO THE LOADER. STOP AND SET THE PARKING BRAKE.
3.CONNECT COLOR CODED HYDRAULIC QUICK DISCONNECT TO LOADER HOSES.
4.USE THE LOWER BOOM CONTROL TO LOWER MASTS ONTO RECEIVERS.
5.CONTINUE TO LOWER BOOM UNTIL ALL WEIGHT IS OFF THE FRONT TIRES.
6.LOCK LOADER MOUNTING TUBE INTO RECEIVER WITH LYNCH PINS.
7.ADD
DISASSEMBLY FOR FRONT END LOADER
1.PARK TRACTOR ON FIRM LEVEL GROUND.
2.USE THE LOWER BOOM CONTROL TO TAKE ALL WEIGHT OFF OF FRONT TIRES.
3.REMOVE LYNCH PINS FROM FRONT MOUNT ASSEMBLY.
4.USE THE RAISE BOOM CONTROL UNTIL MASTS EXIT THEIR RECEIVERS.
5.DISCONNECT THE COLOR CODED HYDRAULIC QUICK DISCONNECTS.
6.SLOWLY DRIVE AWAY FROM LOADER.
IMPORTANT
TO PREVENT POSSIBLE
TRANSMISSION DAMAGE, ENGAGE
THE 4WD ONLY WHEN ADDITIONAL
TRACTION IS NEEDED WHILE
OPERATING IN LOOSE SOIL OR ON
SLIPPERY SURFACES (E.G. MUD,
SNOW), OR WHEN DESCENDING A
SLOPE. DISENGAGE THE 4WD
WHEN OPERATING ON FIRM, FLAT
SURFACES OR WHEN OPERATING
AT HIGH SPEEDS.
6