JVC RX-6510VBK manual CD changer, 7/P, Cassette deck, Rew, CD recorder

Page 31

CD changer

After pressing CONTROL repeatedly until “CDDSC” appears on the display window, you can perform the following operations on the CD changer:

PLAY3:

Starts playing.

4:

Returns to the beginning of the current (or previous)

¢:

track.

Skips to the beginning of the next track.

STOP7:

Stops playing.

PAUSE8:

Pauses playing. To release it, press PLAY3.

1 – 6, 7/P:

Selects the number of a disc installed in a CD

 

changer.

After pressing CD, you can perform the following operations on the CD changer:

1 – 10, +10: Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

EXAMPLE:

•Selecting disc number 4, track number 12, and starting playback.

1.Press CONTROL repeatedly until “CDDSC” appears on the display window, then press 4.

2.Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301)

you can do the following operations using the number buttons after pressing CD.

1.Select a disc number.

2.Then select a track number (always enter two digits).

3.Start playback.

EXAMPLES:

•Selecting disc number 3, track number 2, and starting playback. Press 3, then, 0, 2, then PLAY3.

•Selecting disc number 10, track number 5, and starting playback. Press 1, 0, then, 0, 5, then PLAY3.

•Selecting disc number 105, track number 12, and starting playback.

Press 1, 0, 5, then 1, 2 then PLAY3.

Cassette deck

After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE” appears on the display window), you can perform the following operations on a cassette deck:

PLAY3:

Starts playing.

REW:

Fast winds the tape from right to left.

FF:

Fast winds the tape from left to right.

STOP7:

Stops operations.

PAUSE8:

Pauses playing. To release it, press PLAY3.

REC PAUSE: Starts recording or enters recording pause.

CD recorder

After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE” appears on the display window), you can perform the following operations on the CD recorder:

PLAY3:

Starts playing.

4:

Returns to the beginning of the current (or previous)

¢:

track.

Skips to the beginning of the next track.

STOP7:

Stops playing.

PAUSE8:

Pauses playing. To release it, press PLAY3.

REC PAUSE: Starts recording or enters recording pause.

Note:

You can use either TAPE/CDR button or CONTROL button to activate the buttons listed above. If you press TAPE/CDR, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “TAPE,” the playing source does not change.

English

28

Page 30 Page 32
Image 31
Page 30 Page 32
Contents RX-6510VBK Mises en garde, précautions et indications diverses English Français Table of Contents Front Panel Remote ControlEx. When you press CD button Parts IdentificationGetting Started Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesAM Antenna Connections Connecting the SpeakersBasic connecting procedure Connecting the front speakersAudio component connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connectionsIf your audio components have a Compu Link jack To audio inputVideo component connections CD recorderDigital TV DVD player Digital connectionsTo S-video input To composite video input DVD playerR6PSUM-3/AA15F Plug the power cord into an AC outletBasic Operations Turning the Power On and Off StandbySelecting the Source to Play Selecting different sources for picture and sound Adjusting the VolumeListening only with headphones Selecting the Front SpeakersMuting the Sound Attenuating the Input SignalAdjusting the Tone Adjusting the Subwoofer Output LevelRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Setting the Subwoofer InformationTo select the delay time of the rear speaker output Setting the Speakers for the DSP ModesCenter Delay appears on Display Rear Delay appears on DisplayTo select the appropriate item About the compression level Crossover FRQ Crossover Frequency appears on the displayTo select the low frequency effect attenuator level Drange Comp Dynamic Range Compression appears on DisplaySelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingPress ANALOG/DIGITAL to Storing the Basic Settings AdjustmentsUsing the Sleep Timer Change the input modeUsing Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts Selecting the FM Reception Mode What are the DSP Modes? Using the DSP ModesSurround modes Possible × Impossible Reproducing the Sound FieldDAP modes Early reflections Behind Direct soundsAvailable DSP Modes According to the Speaker Arrangement Adjusting the Surround Modes Level you want Press DSP Mode repeatedly untilAdjust the effect level Press Effect to select an effectDance CLUB, HALL, or Pavilion appears on Display Adjusting the DAP ModesDAP mode Live Club Adjust the rear speaker output levelsPress Surround ON/OFF To cancel the Dolby/DTS Surround modeTo cancel the DSP mode Activating the DSP ModesAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Press the play 3 button on the CD playerSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerREW CD changer7/P Cassette deckPause Operating Video ComponentsPlay StopOperating Other Manufacturers’ Video Equipment Press and hold TV PowerEnter manufacturer’s code using buttons Release TV PowerRelease CATV/DBS Power Try to operate your VCR by pressing VCR Power Release VCR PowerIf there are more than one code listed for your brand 04, 05 Release Audio PowerPlay JVC Denon Panasonic Philips PioneerProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalAM tuner FM tuner IHFGeneral EN, FR 0301NHMMDWJEIN

RX-6510VBK specifications

The JVC RX-6510VBK is a dynamic and robust A/V receiver that caters to both audiophiles and casual listeners alike. This versatile piece of equipment combines advanced technology with user-friendly features, making it an excellent choice for home theater setups and music enthusiasts.

One of the standout characteristics of the RX-6510VBK is its power output. It delivers 100 watts per channel across five channels, ensuring that movies and music come alive with impressive clarity and depth. The receiver supports a range of speaker configurations, allowing users to optimize their sound experience based on their available space and preferences. The flexibility of setup means that whether you are using a simple stereo speaker system or a full surround sound setup, the RX-6510VBK can accommodate and enhance the experience.

In terms of connectivity, the RX-6510VBK is equipped with multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices effortlessly. The support for 4K video pass-through ensures that users can enjoy their media in stunning high definition, future-proofing their home entertainment systems. Additionally, the receiver includes optical and coaxial digital audio inputs, ensuring compatibility with a wide range of devices.

A notable technology incorporated within the RX-6510VBK is JVC’s digital sound processing, which enhances audio playback and ensures a clear, immersive sound experience. The built-in equalizer provides various settings to tailor the audio output based on listener preferences or room characteristics. This personalization allows for a sound profile that ideally suits the environment and enhances listener enjoyment.

Further enhancing its usability is the intuitive remote control that simplifies operation from across the room. The on-screen display provides quick access to settings and adjustments, making navigation straightforward and user-friendly.

With its range of features, solid power output, and impressive connectivity options, the JVC RX-6510VBK stands out as a reliable and high-quality choice for anyone looking to elevate their audio-visual experience. Whether it’s for movie nights or music enjoyment, this receiver delivers performance and flexibility that meets the demands of modern home entertainment systems.
Top Page Image Contents