JVC LVT1112-001A manual Using DSP modes, Repeat steps 5 and 6 to adjust the other settings

Page 36

Creating realistic sound fields

CENTER*1: To adjust the center speaker output level

(from –10 dB to +10 dB).

SURR L*1: To adjust the left surround speaker output level (from –10 dB to +10 dB).

SURR R*1: To adjust the right surround speaker output level (from –10 dB to +10 dB).

PANORAMA control*2:

•Select “ON” when you would like to enjoy

“wraparound” sound effect with side-wall image.

•Select “OFF” when you would like to hear originally recorded sound.

*1 “0” is the initial setting for each speaker setting. *2 “OFF” is the initial setting.

Using DSP modes

Once you have adjusted the DSP modes, the adjustment is

memorized for each source.

•You cannot use the DSP modes if no surround speakers are connected.

•You cannot adjust the effect level for “ALL CH ST.”

When operating this receiver using the remote control,

DVD

 

always set the mode selector to AUDIO/TV/VCR/STB.

AUDIO/TV

 

 

/VCR/STB

 

 

 

 

 

 

 

Before you start, remember...

Make sure that you have set the speaker information correctly (see pages 15 to 18).

6Turn MULTI JOG to adjust the item selected in step 5, then press SET.

Your setting is stored.

•When adjusting the speaker output levels, make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.

L

 

 

 

R

PL ΙΙ

LPCM SUBWFR

VOL

Ex.: When selecting “+8 (dB)” for “CENTER.”

7Repeat steps 5 and 6 to adjust the other settings.

To cancel Surround mode

Press SURROUND repeatedly on the remote control or press SURROUND then turn MULTI JOG on the front panel so that “STEREO” appears on the display.

•If Surround mode is canceled while playing back multi-channel digital software, all channel signals are mixed and output through the front speakers (and subwoofer if you have connected a subwoofer and set the subwoofer setting correctly—“USE” for Quick Setup or “YES” for Manual Setup—see pages 16 and 17).

From the remote control:

AUDIO

SUBTITLE TITLE/GROUP RETURN

It will be convenient for you to use

ZOOM

 

BASS

TREBLE

 

the remote control for the sound

 

1

BASS

TREBLE

 

2

3

 

VFP

4

5

6

adjustments, since you can make

 

7

8

9

 

adjustments from your listening

ANGLE

10

0

+10

TV RETURN

 

100+

 

REPEAT

 

 

 

point, and use the test signal.

 

3D

 

 

DIMMER

SLEEP ANALOG/DIGITAL CANCEL

 

 

 

INPUT

 

SMART S. SETUP BASS BOOST

 

A.POSITION

 

 

 

TONE

 

 

 

 

SURROUND

 

TEST

EFFECT

DECODE

 

SUBWFR CENTER

L

SURR R

 

1Start playing 2 channel software—either Linear PCM or analogue signal—and select the source.

2Press SURROUND repeatedly until one of the DSP modes you want to apply appears on the display.

The DSP indicator lights up on the display.

•Each time you press the button, the DSP modes change as follows:

L R

LPCM SUBWFR DSP

VOL

 

NOTES

 

 

•

You can adjust the speaker output levels using the remote control

 

 

without outputting the test tone.

 

•

You cannot adjust the center speaker output level and no test tone

3

 

comes out of the center speaker when “CNTR SP” is set to “NO.”

•You cannot adjust the surround speaker output levels and no test tone comes out of the surround speakers when “SURR SP” is set to “NO.”

•Remember not to change the speaker setting while using any Surround modes; otherwise, the Surround mode may be canceled when you deactivate the speakers required for it .

•You cannot use any Surround modes when selecting DVD MULTI as a playback source.

PLII MOVIE

 

 

 

 

 

 

PLII MUSIC

 

 

 

 

 

 

 

 

 

 

LIVE CLUB

 

 

 

 

DANCE CLUB

 

 

 

 

 

HALL

 

 

 

 

 

 

PAVILION

 

 

 

 

 

 

 

 

 

 

ALL CH ST.

 

 

STEREO (Surround/DSP off)

 

(Back to the beginning)

 

 

 

 

 

 

 

Press TEST to check the speakers output balance.

“TEST L” starts flashing on the display, and a test tone comes out of the speakers as follows:

L R

LPCM SUBWFR DSP

VOL

TEST L TEST C TEST R

(Left front speaker) (Center speaker) (Right front speaker)

TEST LS

 

TEST RS

 

(Left surround speaker) (Right surround speaker)

32

Page 35 Page 37
Image 36
Page 35 Page 37
Contents RX-ES9SL LVT1112-001AIf in Doubt Consult a Competent Electrician RX-ES9SL Do not stack RX-ES9SL and other componentsAbove ALL Table of Contents Remote control When operating the receiver, set the mode selector i toParts identification AUDIO/TV/VCR/STBParts identification Front panelRear panel Display windowBefore installation Checking the supplied accessoriesPutting batteries in the remote control Getting startedConnecting the FM and AM MW antennas Getting startedFM antenna connection FM antenna suppliedConnecting the speakers Speaker Layout DiagramConnecting the subwoofer Connecting the front, center, and surround speakersConnecting video components Digital connectionDVD Player STB Set Top BoxScart connection VR VDR or VCRFor an analogue decoder For recording pictures from STBFor TV and video format For T-V LinkConnecting the power cord Analogue connection for DVD Multi playback seeDVD player with 5.1 channel Analogue discrete jacksTurn on the power To turn off the power into standbySelecting the analogue or digital input mode Basic operationsAdjust the volume Selecting the digital decode modeListening with headphones Basic operationsTo cancel TV Direct and turn off the receiver, press To restore the sound, press Muting againActivating TV Direct Turning off the sounds temporarily- MutingTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Changing the display brightnessSpeaker settings From the remote control onlyTV/VCR/STB Speaker settings Operating procedure Setting the speakers sizeWhen selecting Medium Room When selecting Large RoomSetting the speaker delay time Setting the crossover frequency-CROSSSetting the low frequency effect attenuator -LFE Setting the dynamic range compression -D.COMPBasic settings Operating procedureDigital IN* Auto SR Mode Setting Auto Surround-AUTO SR Setting the Auto Function mode-MODEBasic settings Sound adjustments Adjusting the tone-BASS, TrebleAdjusting the subwoofer output level Press AdjustAdjusting the front speakers output balance-BAL Attenuating the input signal-ATTSound adjustments When using the remote control Press Bass BoostTuning in to stations manually Using preset tuningFrom the remote control only Press FM/AM to select the band Tuner operationsSelecting the FM reception mode To tune in a preset stationTuner operations Using the RDS Radio Data System to receive FM stations What information can RDS signals provide?Press Display while listening to an FM station PS PTYTo search for a program using the PTY codes Description of the PTY codesPress PTY Search while listening to an FM station PTY codesSwitching to broadcast program of your choice temporarily TA News Info TA/NEWS TA/INFONone TA/NEWS/INFO NEWS/INFO News NewsCreating realistic sound fields Reproducing theater ambienceIntroducing the Surround/DSP modes Surround modesDSP Digital Signal Processor modes Available Surround/DSP modes for each input signalCreating realistic sound fields DAP Digital Acoustic Processor modesUsing Surround modes Surround modeSelect and play software you like Press Surround to select an appropriateTurn Multi JOG to select a appropriate Surround mode Press Test to check the speakers output balancePress Test again to stop the test tone Press SurroundUsing DSP modes Repeat steps 5 and 6 to adjust the other settingsTo cancel Surround mode Live Club Dance Club Hall Pavilion ALL CH STTo cancel DSP Modes Effect 3 Effect 4 Effect Effect 2 EffectEffect available only for DAP modes *2 Using the DVD Multi playback mode Adjusting the speaker output levelOperating other JVC products DVD playerChanging the transmittable signals for operating an Operating other manufacturers’ equipmentTry to operate your STB by pressing STB Manufacturer CodesChanging the transmittable signals for operating a Changing the transmittable signals for operating aOperating other manufacturers’ equipment Try to operate your VCR by pressing VCRTroubleshooting Problem Possible Cause SolutionGeneral VDRTroubleshooting Surround/DSPFM/AM Specifications AmplifierFM tuner IHF AM MW tuner 2003 Victor Company of JAPAN, Limited 0703NHMMDWJEIN

LVT1112-001A specifications

The JVC LVT1112-001A is a versatile and robust device designed to enhance audio and video experiences in various settings, including home theater systems, professional audio installations, and personal entertainment setups. This product incorporates a range of cutting-edge technologies and features that cater to both audiophiles and casual users.

At the heart of the JVC LVT1112-001A is its impressive sound quality. Utilizing advanced audio processing technologies, this device delivers crystal-clear audio reproduction across a broad frequency range. Whether it’s the thumping bass of your favorite music tracks or the subtle nuances in dialogue from a movie, the LVT1112-001A ensures that every sound is rendered with precision. The inclusion of high-performance DACs (Digital-to-Analog Converters) further enhances audio fidelity, reducing distortion and ensuring a clean audio signal.

One of the standout features of the JVC LVT1112-001A is its flexibility in connectivity options. The device supports multiple audio and video inputs, including HDMI, optical, and AUX, making it easy to connect to a variety of devices such as TVs, gaming consoles, and streaming devices. This adaptability means users can seamlessly integrate the LVT1112-001A into their existing setups without the need for additional converters or adapters.

In addition to its impressive audio capabilities, the JVC LVT1112-001A boasts a user-friendly interface that simplifies navigation and operation. The intuitive remote control allows users to switch between inputs, adjust volume levels, and access various audio settings with ease. For those who prefer hands-on control, the device features conveniently placed buttons for quick adjustments directly on the unit.

Another significant aspect of the JVC LVT1112-001A is its durability and build quality. Constructed with high-quality materials, this device is designed to withstand the rigors of daily use while maintaining aesthetic appeal in both modern and traditional settings. This robustness ensures that users can rely on the device for long-term performance.

Overall, the JVC LVT1112-001A is a well-rounded audio and video solution that combines superior sound quality, versatile connectivity, user-friendly operation, and durable construction. Whether for an immersive home theater experience or casual listening, this device meets the demands of a diverse range of users, making it a valuable addition to any entertainment setup.
Top Page Image Contents