JVC LVT1112-001A Switching to broadcast program of your choice temporarily, News News, Display

Page 31

Tuner operations

Switching to broadcast program of your choice temporarily

Another convenient RDS service is called “Enhanced Other Networks.”

This allows the receiver to switch temporarily to a broadcast program of your choice (TA, NEWS, and/or INFO) from a different station except in the following cases:

•When you are listening to non-RDS Networks—all AM (MW) stations, some FM stations and other sources.

•When the receiver is in standby mode or in TV Direct mode.

Before you start, remember...

The Enhanced Other Networks function is only applicable to preset FM stations.

Press TA/NEWS/INFO repeatedly until the program type you want appears on the display.

•Each time you press the button, the display changes to show the following:

TA NEWS INFO TA/NEWS TA/INFO

(None) TA/NEWS/INFO NEWS/INFO

TA: Traffic Announcement in your area.

NEWS: News.

INFO: Program the purpose of which is to impart advice in the widest sense.

How the Enhanced Other Networks function actually works:

If the station currently tuned in starts broadcasting the program type you have selected

The receiver continues to receive the station, but the indicator of the received PTY code starts flashing.

‘

When the program is over, the indicator of the received PTY code stops flashing and remains lit, but the receiver remains in Enhanced Other Networks standby mode.

If another FM station in the same Networks starts broadcasting the program type you have selected while you are listening to an FM station

The receiver automatically switches to the station. The indicator of the received PTY code starts flashing.

‘

When the program is over, the receiver goes back to the station previously tuned in, but still remains in Enhanced Other Networks standby mode. The indicator of the received PTY code stops flashing and remains lit.

To stop listening to the program selected by Enhanced Other Networks

Press TA/NEWS/INFO repeatedly again so that the program type (TA/ NEWS/INFO) indicator goes off from the display. The receiver exits from Enhanced Other Networks standby mode and goes back to the previously selected station.

When an emergency broadcast (Alarm ! signal) is sent from an FM station

The receiver automatically tunes in the station except in the following cases:

•When you are listening to non-RDS Networks—all AM (MW) stations, some FM stations and other sources.

•When the receiver is in standby mode or TV Direct mode.

While receiving an emergency broadcast, “Alarm !” appears on the display.

The TEST signal is used for equipment test—whether it can receive the Alarm ! signal correctly

The TEST signal makes the receiver work in the same way as the Alarm ! signal does. If the TEST signal is received, the receiver automatically switches to the station broadcasting the TEST signal. While receiving the TEST signal, “TEST” appears on the display.

NOTES

•Enhanced Other Networks data sent from some stations may not be compatible with this receiver.

•Enhanced Other Networks does not function for some FM stations with RDS service.

•While listening to a program tuned in by the Enhanced Other Networks function, the station does not change even if another network station starts broadcasting a program of the same Enhanced Other Networks data.

•While listening to a program tuned in by the Enhanced Other Networks function, you can only use the TA/NEWS/INFO and

DISPLAY.

•The Enhanced Other Networks mode only works when receiving an FM station with the Enhanced Other Networks code.

CAUTION:

If the stations alternate intermittently between the station tuned by the Enhanced Other Networks function and the currently tuned station, press TA/NEWS/INFO repeatedly to cancel the Enhanced Other Networks function. If you do not press the button, the currently tuned station is received finally, and the indication of the Enhanced Other Networks data type flashing on the display disappears.

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents LVT1112-001A RX-ES9SLIf in Doubt Consult a Competent Electrician Do not stack RX-ES9SL and other components RX-ES9SLAbove ALL Table of Contents AUDIO/TV/VCR/STB Remote controlWhen operating the receiver, set the mode selector i to Parts identificationDisplay window Parts identificationFront panel Rear panelGetting started Before installationChecking the supplied accessories Putting batteries in the remote controlFM antenna supplied Connecting the FM and AM MW antennasGetting started FM antenna connectionConnecting the front, center, and surround speakers Connecting the speakersSpeaker Layout Diagram Connecting the subwooferSTB Set Top Box Connecting video componentsDigital connection DVD PlayerFor recording pictures from STB Scart connectionVR VDR or VCR For an analogue decoderFor T-V Link For TV and video formatAnalogue discrete jacks Connecting the power cordAnalogue connection for DVD Multi playback see DVD player with 5.1 channelBasic operations Turn on the powerTo turn off the power into standby Selecting the analogue or digital input modeBasic operations Adjust the volumeSelecting the digital decode mode Listening with headphonesTurning off the sounds temporarily- Muting To cancel TV Direct and turn off the receiver, pressTo restore the sound, press Muting again Activating TV DirectChanging the display brightness Turning off the power with the Sleep TimerBasic adjustment of auto memory Signal and speaker indicators on the displayFrom the remote control only Speaker settingsTV/VCR/STB Speaker settings When selecting Large Room Operating procedureSetting the speakers size When selecting Medium RoomSetting the dynamic range compression -D.COMP Setting the speaker delay timeSetting the crossover frequency-CROSS Setting the low frequency effect attenuator -LFEOperating procedure Basic settingsDigital IN* Auto SR Mode Setting the Auto Function mode-MODE Setting Auto Surround-AUTO SRBasic settings Press Adjust Sound adjustmentsAdjusting the tone-BASS, Treble Adjusting the subwoofer output levelWhen using the remote control Press Bass Boost Adjusting the front speakers output balance-BALAttenuating the input signal-ATT Sound adjustmentsTuner operations Tuning in to stations manuallyUsing preset tuning From the remote control only Press FM/AM to select the bandTo tune in a preset station Selecting the FM reception modeTuner operations PS PTY Using the RDS Radio Data System to receive FM stationsWhat information can RDS signals provide? Press Display while listening to an FM stationPTY codes To search for a program using the PTY codesDescription of the PTY codes Press PTY Search while listening to an FM stationNews News Switching to broadcast program of your choice temporarilyTA News Info TA/NEWS TA/INFO None TA/NEWS/INFO NEWS/INFOSurround modes Creating realistic sound fieldsReproducing theater ambience Introducing the Surround/DSP modesDAP Digital Acoustic Processor modes DSP Digital Signal Processor modesAvailable Surround/DSP modes for each input signal Creating realistic sound fieldsPress Surround to select an appropriate Using Surround modesSurround mode Select and play software you likePress Surround Turn Multi JOG to select a appropriate Surround modePress Test to check the speakers output balance Press Test again to stop the test toneLive Club Dance Club Hall Pavilion ALL CH ST Using DSP modesRepeat steps 5 and 6 to adjust the other settings To cancel Surround modeEffect 3 Effect 4 Effect Effect 2 Effect To cancel DSP ModesEffect available only for DAP modes *2 Adjusting the speaker output level Using the DVD Multi playback modeDVD player Operating other JVC productsManufacturer Codes Changing the transmittable signals for operating anOperating other manufacturers’ equipment Try to operate your STB by pressing STBTry to operate your VCR by pressing VCR Changing the transmittable signals for operating aChanging the transmittable signals for operating a Operating other manufacturers’ equipmentVDR TroubleshootingProblem Possible Cause Solution GeneralSurround/DSP TroubleshootingFM/AM AM MW tuner SpecificationsAmplifier FM tuner IHF 2003 Victor Company of JAPAN, Limited 0703NHMMDWJEIN

LVT1112-001A specifications

The JVC LVT1112-001A is a versatile and robust device designed to enhance audio and video experiences in various settings, including home theater systems, professional audio installations, and personal entertainment setups. This product incorporates a range of cutting-edge technologies and features that cater to both audiophiles and casual users.

At the heart of the JVC LVT1112-001A is its impressive sound quality. Utilizing advanced audio processing technologies, this device delivers crystal-clear audio reproduction across a broad frequency range. Whether it’s the thumping bass of your favorite music tracks or the subtle nuances in dialogue from a movie, the LVT1112-001A ensures that every sound is rendered with precision. The inclusion of high-performance DACs (Digital-to-Analog Converters) further enhances audio fidelity, reducing distortion and ensuring a clean audio signal.

One of the standout features of the JVC LVT1112-001A is its flexibility in connectivity options. The device supports multiple audio and video inputs, including HDMI, optical, and AUX, making it easy to connect to a variety of devices such as TVs, gaming consoles, and streaming devices. This adaptability means users can seamlessly integrate the LVT1112-001A into their existing setups without the need for additional converters or adapters.

In addition to its impressive audio capabilities, the JVC LVT1112-001A boasts a user-friendly interface that simplifies navigation and operation. The intuitive remote control allows users to switch between inputs, adjust volume levels, and access various audio settings with ease. For those who prefer hands-on control, the device features conveniently placed buttons for quick adjustments directly on the unit.

Another significant aspect of the JVC LVT1112-001A is its durability and build quality. Constructed with high-quality materials, this device is designed to withstand the rigors of daily use while maintaining aesthetic appeal in both modern and traditional settings. This robustness ensures that users can rely on the device for long-term performance.

Overall, the JVC LVT1112-001A is a well-rounded audio and video solution that combines superior sound quality, versatile connectivity, user-friendly operation, and durable construction. Whether for an immersive home theater experience or casual listening, this device meets the demands of a diverse range of users, making it a valuable addition to any entertainment setup.
Top Page Image Contents