JVC LVT1112-001A manual Specifications, Amplifier, FM tuner IHF, AM MW tuner, General

Page 44
1 V(p-p)/75Ω
0.286 V(p-p)/75Ω
0.7 V(p-p)/75Ω
45 dB Negative

Specifications

Designs & specifications are subject to change without notice.

Amplifier

Output Power

At stereo operation:

 

Front channels:

100 W per channel, min. RMS, both channels

 

driven into 8 Ω at 1 kHz with no more than

 

10% total harmonic distortion. (IEC268-3)

At surround operation:

Front channels:

100 W per channel, min. RMS, driven into

 

8 Ω at 1 kHz with no more than 0.8% total

 

harmonic distortion.

Center channel:

100 W, min. RMS, driven into 8 Ω at 1 kHz,

 

with no more than 0.8% total harmonic

distortion.

Surround channels: 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

FM tuner (IHF)

Tuning Range:

87.50 MHz to 108.00 MHz

Usable Sensitivity:

 

Monaural:

17.0 dBf (1.95 µV/75 Ω)

50 dB Quieting Sensitivity:

 

Monaural:

21.3 dBf (3.2 µV/75 Ω)

Stereo:

41.3 dBf (31.5 µV/75 Ω)

Stereo Separation at REC OUT:

35 dB at 1 kHz

AM (MW) tuner

Tuning Range:

 

MW:

522 kHz to 1 629 kHz

Audio

Audio Input Sensitivity/Impedance (1 kHz): DVD, DVD MULTI, STB, VR, TV:

260 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial: DIGITAL 1 (VR): 0.5 V(p-p)/75 Ω

Optical: DIGITAL 2/3 (STB/DVD):

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:VR, TV:

250 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

 

DVD MULTI:

87 dB/62 dB

Frequency Response (8 Ω):

 

DVD, STB, VR, TV:

20 Hz to 20 kHz (±1 dB)

Tone Control:

 

Bass (100 Hz):

±10 dB ±2 dB

Treble (10 kHz):

±10 dB ±2 dB

Bass Boost:

+4 dB ± 1 dB at 100 Hz

Video

Video Input Sensitivity/Impedance (1 kHz):

Composite video:DVD, STB, VR, TV:

1 V(p-p)/75 Ω

S-VIDEO:DVD, STB, VR:

 

(Y: luminance):

1 V(p-p)/75 Ω

(C: chrominance):

0.286 V(p-p)/75 Ω

RGB:DVD, STB, VR:

0.7 V(p-p)/75 Ω

Video Output Level/Impedance (1 kHz):

Composite video:VR, TV: 1 V(p-p)/75 Ω S-VIDEO:TV:

(Y: luminance):

(C: chrominance): RGB:TV:

Signal-to-Noise Ratio (S/N):

Synchronize:

General

Power Requirements:

AC

230 V, 50 Hz

Power Consumption:

105 W (at operation)

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 69.5 mm x 330.5 mm

Mass:

6.6 kg

 

40

Page 43 Page 45
Image 44
Page 43 Page 45
Contents RX-ES9SL LVT1112-001AIf in Doubt Consult a Competent Electrician RX-ES9SL Do not stack RX-ES9SL and other componentsAbove ALL Table of Contents Remote control When operating the receiver, set the mode selector i toParts identification AUDIO/TV/VCR/STBParts identification Front panelRear panel Display windowBefore installation Checking the supplied accessoriesPutting batteries in the remote control Getting startedConnecting the FM and AM MW antennas Getting startedFM antenna connection FM antenna suppliedConnecting the speakers Speaker Layout DiagramConnecting the subwoofer Connecting the front, center, and surround speakersConnecting video components Digital connectionDVD Player STB Set Top BoxScart connection VR VDR or VCRFor an analogue decoder For recording pictures from STBFor TV and video format For T-V LinkConnecting the power cord Analogue connection for DVD Multi playback seeDVD player with 5.1 channel Analogue discrete jacksTurn on the power To turn off the power into standbySelecting the analogue or digital input mode Basic operationsAdjust the volume Selecting the digital decode modeListening with headphones Basic operationsTo cancel TV Direct and turn off the receiver, press To restore the sound, press Muting againActivating TV Direct Turning off the sounds temporarily- MutingTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Changing the display brightnessTV/VCR/STB Speaker settingsFrom the remote control only Speaker settings Operating procedure Setting the speakers sizeWhen selecting Medium Room When selecting Large RoomSetting the speaker delay time Setting the crossover frequency-CROSSSetting the low frequency effect attenuator -LFE Setting the dynamic range compression -D.COMPDigital IN* Auto SR Mode Basic settingsOperating procedure Basic settings Setting Auto Surround-AUTO SRSetting the Auto Function mode-MODE Sound adjustments Adjusting the tone-BASS, TrebleAdjusting the subwoofer output level Press AdjustAdjusting the front speakers output balance-BAL Attenuating the input signal-ATTSound adjustments When using the remote control Press Bass BoostTuning in to stations manually Using preset tuningFrom the remote control only Press FM/AM to select the band Tuner operationsTuner operations Selecting the FM reception modeTo tune in a preset station Using the RDS Radio Data System to receive FM stations What information can RDS signals provide?Press Display while listening to an FM station PS PTYTo search for a program using the PTY codes Description of the PTY codesPress PTY Search while listening to an FM station PTY codesSwitching to broadcast program of your choice temporarily TA News Info TA/NEWS TA/INFONone TA/NEWS/INFO NEWS/INFO News NewsCreating realistic sound fields Reproducing theater ambienceIntroducing the Surround/DSP modes Surround modesDSP Digital Signal Processor modes Available Surround/DSP modes for each input signalCreating realistic sound fields DAP Digital Acoustic Processor modesUsing Surround modes Surround modeSelect and play software you like Press Surround to select an appropriateTurn Multi JOG to select a appropriate Surround mode Press Test to check the speakers output balancePress Test again to stop the test tone Press SurroundUsing DSP modes Repeat steps 5 and 6 to adjust the other settingsTo cancel Surround mode Live Club Dance Club Hall Pavilion ALL CH STEffect available only for DAP modes *2 To cancel DSP ModesEffect 3 Effect 4 Effect Effect 2 Effect Using the DVD Multi playback mode Adjusting the speaker output levelOperating other JVC products DVD playerChanging the transmittable signals for operating an Operating other manufacturers’ equipmentTry to operate your STB by pressing STB Manufacturer CodesChanging the transmittable signals for operating a Changing the transmittable signals for operating aOperating other manufacturers’ equipment Try to operate your VCR by pressing VCRTroubleshooting Problem Possible Cause SolutionGeneral VDRFM/AM TroubleshootingSurround/DSP Specifications AmplifierFM tuner IHF AM MW tuner 2003 Victor Company of JAPAN, Limited 0703NHMMDWJEIN

LVT1112-001A specifications

The JVC LVT1112-001A is a versatile and robust device designed to enhance audio and video experiences in various settings, including home theater systems, professional audio installations, and personal entertainment setups. This product incorporates a range of cutting-edge technologies and features that cater to both audiophiles and casual users.

At the heart of the JVC LVT1112-001A is its impressive sound quality. Utilizing advanced audio processing technologies, this device delivers crystal-clear audio reproduction across a broad frequency range. Whether it’s the thumping bass of your favorite music tracks or the subtle nuances in dialogue from a movie, the LVT1112-001A ensures that every sound is rendered with precision. The inclusion of high-performance DACs (Digital-to-Analog Converters) further enhances audio fidelity, reducing distortion and ensuring a clean audio signal.

One of the standout features of the JVC LVT1112-001A is its flexibility in connectivity options. The device supports multiple audio and video inputs, including HDMI, optical, and AUX, making it easy to connect to a variety of devices such as TVs, gaming consoles, and streaming devices. This adaptability means users can seamlessly integrate the LVT1112-001A into their existing setups without the need for additional converters or adapters.

In addition to its impressive audio capabilities, the JVC LVT1112-001A boasts a user-friendly interface that simplifies navigation and operation. The intuitive remote control allows users to switch between inputs, adjust volume levels, and access various audio settings with ease. For those who prefer hands-on control, the device features conveniently placed buttons for quick adjustments directly on the unit.

Another significant aspect of the JVC LVT1112-001A is its durability and build quality. Constructed with high-quality materials, this device is designed to withstand the rigors of daily use while maintaining aesthetic appeal in both modern and traditional settings. This robustness ensures that users can rely on the device for long-term performance.

Overall, the JVC LVT1112-001A is a well-rounded audio and video solution that combines superior sound quality, versatile connectivity, user-friendly operation, and durable construction. Whether for an immersive home theater experience or casual listening, this device meets the demands of a diverse range of users, making it a valuable addition to any entertainment setup.
Top Page Image Contents