JVC LVT1112-001A manual Do not stack RX-ES9SL and other components

Page 3

CAUTION

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted candles, on the apparatus.

•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Spacing 15 cm or more

Wall or

obstructions

RX-ES9SL

Stand height 15 cm or more

Floor

* Do not stack RX-ES9SL and other components.

G-2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents LVT1112-001A RX-ES9SLIf in Doubt Consult a Competent Electrician Do not stack RX-ES9SL and other components RX-ES9SLAbove ALL Table of Contents AUDIO/TV/VCR/STB Remote controlWhen operating the receiver, set the mode selector i to Parts identificationDisplay window Parts identificationFront panel Rear panelGetting started Before installationChecking the supplied accessories Putting batteries in the remote controlFM antenna supplied Connecting the FM and AM MW antennasGetting started FM antenna connectionConnecting the front, center, and surround speakers Connecting the speakersSpeaker Layout Diagram Connecting the subwooferSTB Set Top Box Connecting video componentsDigital connection DVD PlayerFor recording pictures from STB Scart connectionVR VDR or VCR For an analogue decoderFor T-V Link For TV and video formatAnalogue discrete jacks Connecting the power cordAnalogue connection for DVD Multi playback see DVD player with 5.1 channelBasic operations Turn on the powerTo turn off the power into standby Selecting the analogue or digital input modeBasic operations Adjust the volumeSelecting the digital decode mode Listening with headphonesTurning off the sounds temporarily- Muting To cancel TV Direct and turn off the receiver, pressTo restore the sound, press Muting again Activating TV DirectChanging the display brightness Turning off the power with the Sleep TimerBasic adjustment of auto memory Signal and speaker indicators on the displaySpeaker settings From the remote control onlyTV/VCR/STB Speaker settings When selecting Large Room Operating procedureSetting the speakers size When selecting Medium RoomSetting the dynamic range compression -D.COMP Setting the speaker delay timeSetting the crossover frequency-CROSS Setting the low frequency effect attenuator -LFEBasic settings Operating procedureDigital IN* Auto SR Mode Setting Auto Surround-AUTO SR Setting the Auto Function mode-MODEBasic settings Press Adjust Sound adjustmentsAdjusting the tone-BASS, Treble Adjusting the subwoofer output levelWhen using the remote control Press Bass Boost Adjusting the front speakers output balance-BALAttenuating the input signal-ATT Sound adjustmentsTuner operations Tuning in to stations manuallyUsing preset tuning From the remote control only Press FM/AM to select the bandSelecting the FM reception mode To tune in a preset stationTuner operations PS PTY Using the RDS Radio Data System to receive FM stationsWhat information can RDS signals provide? Press Display while listening to an FM stationPTY codes To search for a program using the PTY codesDescription of the PTY codes Press PTY Search while listening to an FM stationNews News Switching to broadcast program of your choice temporarilyTA News Info TA/NEWS TA/INFO None TA/NEWS/INFO NEWS/INFOSurround modes Creating realistic sound fieldsReproducing theater ambience Introducing the Surround/DSP modesDAP Digital Acoustic Processor modes DSP Digital Signal Processor modesAvailable Surround/DSP modes for each input signal Creating realistic sound fieldsPress Surround to select an appropriate Using Surround modesSurround mode Select and play software you likePress Surround Turn Multi JOG to select a appropriate Surround modePress Test to check the speakers output balance Press Test again to stop the test toneLive Club Dance Club Hall Pavilion ALL CH ST Using DSP modesRepeat steps 5 and 6 to adjust the other settings To cancel Surround modeTo cancel DSP Modes Effect 3 Effect 4 Effect Effect 2 EffectEffect available only for DAP modes *2 Adjusting the speaker output level Using the DVD Multi playback modeDVD player Operating other JVC productsManufacturer Codes Changing the transmittable signals for operating anOperating other manufacturers’ equipment Try to operate your STB by pressing STBTry to operate your VCR by pressing VCR Changing the transmittable signals for operating aChanging the transmittable signals for operating a Operating other manufacturers’ equipmentVDR TroubleshootingProblem Possible Cause Solution GeneralTroubleshooting Surround/DSPFM/AM AM MW tuner SpecificationsAmplifier FM tuner IHF 2003 Victor Company of JAPAN, Limited 0703NHMMDWJEIN

LVT1112-001A specifications

The JVC LVT1112-001A is a versatile and robust device designed to enhance audio and video experiences in various settings, including home theater systems, professional audio installations, and personal entertainment setups. This product incorporates a range of cutting-edge technologies and features that cater to both audiophiles and casual users.

At the heart of the JVC LVT1112-001A is its impressive sound quality. Utilizing advanced audio processing technologies, this device delivers crystal-clear audio reproduction across a broad frequency range. Whether it’s the thumping bass of your favorite music tracks or the subtle nuances in dialogue from a movie, the LVT1112-001A ensures that every sound is rendered with precision. The inclusion of high-performance DACs (Digital-to-Analog Converters) further enhances audio fidelity, reducing distortion and ensuring a clean audio signal.

One of the standout features of the JVC LVT1112-001A is its flexibility in connectivity options. The device supports multiple audio and video inputs, including HDMI, optical, and AUX, making it easy to connect to a variety of devices such as TVs, gaming consoles, and streaming devices. This adaptability means users can seamlessly integrate the LVT1112-001A into their existing setups without the need for additional converters or adapters.

In addition to its impressive audio capabilities, the JVC LVT1112-001A boasts a user-friendly interface that simplifies navigation and operation. The intuitive remote control allows users to switch between inputs, adjust volume levels, and access various audio settings with ease. For those who prefer hands-on control, the device features conveniently placed buttons for quick adjustments directly on the unit.

Another significant aspect of the JVC LVT1112-001A is its durability and build quality. Constructed with high-quality materials, this device is designed to withstand the rigors of daily use while maintaining aesthetic appeal in both modern and traditional settings. This robustness ensures that users can rely on the device for long-term performance.

Overall, the JVC LVT1112-001A is a well-rounded audio and video solution that combines superior sound quality, versatile connectivity, user-friendly operation, and durable construction. Whether for an immersive home theater experience or casual listening, this device meets the demands of a diverse range of users, making it a valuable addition to any entertainment setup.
Top Page Image Contents