JVC LVT1112-001A manual Troubleshooting, General, Problem Possible Cause Solution, Vdr

Page 42

Troubleshooting

Use this chart to help you solve daily operational problems. If there are any problems you cannot solve, contact your JVC’s service center.

General

PROBLEM

POSSIBLE CAUSE

SOLUTION

The power does not come on.

The power cord is not plugged in.

Plug the power cord into an AC outlet.

 

 

 

No sound from speakers.

Speaker signal cables are not connected.

Check speaker wiring and reconnect if necessary.

 

An incorrect source is selected.

Select the correct source.

 

Muting is activated.

Press MUTING to cancel the mute.

 

An incorrect input mode (analogue or

Select the correct input mode (analogue or digital).

 

digital) is selected.

 

 

Connections are incorrect.

Check connections.

 

TV Direct is activated.

Deactivate TV Direct (see pages 13 and 20).

 

 

 

Buttons cannot be used.

TV Direct is activated.

Deactivate TV Direct (see pages 13 and 20).

 

 

 

Sound from one speaker only.

The balance is set to one extreme.

Adjust the balance properly (see page 22).

 

 

 

The unit turns off and becomes standby

Speakers are overloaded because of high

1. Stop the playback source.

mode.

volume.

2. Turn on the unit again, and adjust the volume.

 

Speakers are overloaded because of a

Check the speaker wiring.

 

short circuit at the speaker terminals.

If speaker wiring is not short-circuited, contact your

 

 

dealer.

 

 

 

 

The unit is overloaded because of a high

Consult your dealer after unplugging the power cord.

 

voltage.

 

Remote control does not operate as

The remote control is not ready for your

Press a source selecting button or TONE first, then

you intend.

intended operation.

press the buttons you want to use. (See pages 21,

 

 

35, 36 and 37.)

 

 

 

Remote control does not work.

There is an obstruction hiding the remote

Remove the obstruction.

 

sensor on the unit.

 

 

Batteries are weak.

Replace batteries.

 

The mode selector is set to the incorrect

Set the mode selector to the proper position.

 

position.

 

 

 

 

Remote control does not work for the

You cannot use this remote control to

Use the remote control supplied with the VDR.

VDR.

operate the VDR.

 

 

 

 

Bass sound is reinforced too much

Appropriate bass level is not selected.

Adjust audio position level (see page 22).

when listening in stereo.

 

 

38

Page 41 Page 43
Image 42
Page 41 Page 43
Contents RX-ES9SL LVT1112-001AIf in Doubt Consult a Competent Electrician RX-ES9SL Do not stack RX-ES9SL and other componentsAbove ALL Table of Contents Parts identification Remote controlWhen operating the receiver, set the mode selector i to AUDIO/TV/VCR/STBRear panel Parts identificationFront panel Display windowPutting batteries in the remote control Before installationChecking the supplied accessories Getting startedFM antenna connection Connecting the FM and AM MW antennasGetting started FM antenna suppliedConnecting the subwoofer Connecting the speakersSpeaker Layout Diagram Connecting the front, center, and surround speakersDVD Player Connecting video componentsDigital connection STB Set Top BoxFor an analogue decoder Scart connectionVR VDR or VCR For recording pictures from STBFor TV and video format For T-V LinkDVD player with 5.1 channel Connecting the power cordAnalogue connection for DVD Multi playback see Analogue discrete jacksSelecting the analogue or digital input mode Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeSelecting the digital decode mode Basic operationsActivating TV Direct To cancel TV Direct and turn off the receiver, pressTo restore the sound, press Muting again Turning off the sounds temporarily- MutingSignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory Changing the display brightnessSpeaker settings From the remote control onlyTV/VCR/STB Speaker settings When selecting Medium Room Operating procedureSetting the speakers size When selecting Large RoomSetting the low frequency effect attenuator -LFE Setting the speaker delay timeSetting the crossover frequency-CROSS Setting the dynamic range compression -D.COMPBasic settings Operating procedureDigital IN* Auto SR Mode Setting Auto Surround-AUTO SR Setting the Auto Function mode-MODEBasic settings Adjusting the subwoofer output level Sound adjustmentsAdjusting the tone-BASS, Treble Press AdjustSound adjustments Adjusting the front speakers output balance-BALAttenuating the input signal-ATT When using the remote control Press Bass BoostFrom the remote control only Press FM/AM to select the band Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationTuner operations Press Display while listening to an FM station Using the RDS Radio Data System to receive FM stationsWhat information can RDS signals provide? PS PTYPress PTY Search while listening to an FM station To search for a program using the PTY codesDescription of the PTY codes PTY codesNone TA/NEWS/INFO NEWS/INFO Switching to broadcast program of your choice temporarilyTA News Info TA/NEWS TA/INFO News NewsIntroducing the Surround/DSP modes Creating realistic sound fieldsReproducing theater ambience Surround modesCreating realistic sound fields DSP Digital Signal Processor modesAvailable Surround/DSP modes for each input signal DAP Digital Acoustic Processor modesSelect and play software you like Using Surround modesSurround mode Press Surround to select an appropriatePress Test again to stop the test tone Turn Multi JOG to select a appropriate Surround modePress Test to check the speakers output balance Press SurroundTo cancel Surround mode Using DSP modesRepeat steps 5 and 6 to adjust the other settings Live Club Dance Club Hall Pavilion ALL CH STTo cancel DSP Modes Effect 3 Effect 4 Effect Effect 2 EffectEffect available only for DAP modes *2 Using the DVD Multi playback mode Adjusting the speaker output levelOperating other JVC products DVD playerTry to operate your STB by pressing STB Changing the transmittable signals for operating anOperating other manufacturers’ equipment Manufacturer CodesOperating other manufacturers’ equipment Changing the transmittable signals for operating aChanging the transmittable signals for operating a Try to operate your VCR by pressing VCRGeneral TroubleshootingProblem Possible Cause Solution VDRTroubleshooting Surround/DSPFM/AM FM tuner IHF SpecificationsAmplifier AM MW tuner 2003 Victor Company of JAPAN, Limited 0703NHMMDWJEIN

LVT1112-001A specifications

The JVC LVT1112-001A is a versatile and robust device designed to enhance audio and video experiences in various settings, including home theater systems, professional audio installations, and personal entertainment setups. This product incorporates a range of cutting-edge technologies and features that cater to both audiophiles and casual users.

At the heart of the JVC LVT1112-001A is its impressive sound quality. Utilizing advanced audio processing technologies, this device delivers crystal-clear audio reproduction across a broad frequency range. Whether it’s the thumping bass of your favorite music tracks or the subtle nuances in dialogue from a movie, the LVT1112-001A ensures that every sound is rendered with precision. The inclusion of high-performance DACs (Digital-to-Analog Converters) further enhances audio fidelity, reducing distortion and ensuring a clean audio signal.

One of the standout features of the JVC LVT1112-001A is its flexibility in connectivity options. The device supports multiple audio and video inputs, including HDMI, optical, and AUX, making it easy to connect to a variety of devices such as TVs, gaming consoles, and streaming devices. This adaptability means users can seamlessly integrate the LVT1112-001A into their existing setups without the need for additional converters or adapters.

In addition to its impressive audio capabilities, the JVC LVT1112-001A boasts a user-friendly interface that simplifies navigation and operation. The intuitive remote control allows users to switch between inputs, adjust volume levels, and access various audio settings with ease. For those who prefer hands-on control, the device features conveniently placed buttons for quick adjustments directly on the unit.

Another significant aspect of the JVC LVT1112-001A is its durability and build quality. Constructed with high-quality materials, this device is designed to withstand the rigors of daily use while maintaining aesthetic appeal in both modern and traditional settings. This robustness ensures that users can rely on the device for long-term performance.

Overall, the JVC LVT1112-001A is a well-rounded audio and video solution that combines superior sound quality, versatile connectivity, user-friendly operation, and durable construction. Whether for an immersive home theater experience or casual listening, this device meets the demands of a diverse range of users, making it a valuable addition to any entertainment setup.
Top Page Image Contents