OPERATING YOUR DRYER
End of cycle signal
(on some models)
The dryer sounds a signal to let you know when the cycle is finished. The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed from the dryer as soon as it stops. The End of Cycle On/Off Selec- tor is part of the Start Button, as shown.
NOTE: Unless you turn the Selector to Off, the end of cycle signal sounds at the end of the drying cycle.
End of Cycle Signal
OffOn
Push to Start
End of cycle signal and FINISH GUARD* feature
(on some models)
You can turn the End of Cycle signal and FINISH GUARD feature on and off.
NOTE: Unless you turn Off the Selectors for the FINISH GUARD feature and End of Cycle signal, they operate at the end of the drying cycle.
On Off On Off
Finish Guard Cycle Signal
CLEAN TOUCH* panel
OR
OffOn
Finish Guard
Rotary knob
12