Changing the program sequence
To cancel a program:
^Turn the Program Selector to the “Finish/Start” position.
To interrupt a program:
^Turn the machine off. To
During operation, it is possible to:
–manually omit one or more program stages
or
–manually repeat one or more pro- gram stages.
To change an incorrectly se- lected program:
^Turn the Program Selector to “Finish/Start”. When only the “On” LED is lit, a new program can be se- lected.
To change a program when the Child Safety Feature has been set, see Pro- grammable functions”.
To omit a program stage:
^Turn the Program Selector to “Finish/Start”.
As soon as the program sequence indi- cator lamp for the stage you wish stops flashing:
^turn the Program Selector to the de- sired program.
To repeat a program stage:
a program stage must end before it can be repeated:
^Turn the Program Selector to “Finish/Start”.
When only the “On” LED is illuminated:
^
^After approx. 5 seconds, turn the Program Selector back to “Fin- ish/Start”.
Once the sequence indicator lamp for the stage you wish to repeat starts flashing:
turn the Program Selector to the de- sired program within 3 seconds.
19