Miele W 1903 operating instructions Cleaning the drain pump and lint trap

Page 21

Cleaning and care

Cleaning the drain pump and lint trap

Occasionally small objects, (buttons, coins, etc.), may find their way into the lint trap. If the machine does not drain completely, the lint trap should be checked to ensure that it is free of for- eign objects.

To clean the lint trap, remove the tool from behind the detergent dispenser drawer.

^Open the lint trap door.

^Place a 2 quart (2l) capacity con- tainer underneath the drain tube.

^Turn the lint trap lid counterclockwise 2 - 3 times. Do not remove it. Approx. 2 quarts (2 l) of water will drain out of the hose.

If the main drain hose is clogged, more water will be retained in the machine (max. 6.5 gal/25l). In this case, tighten the lint trap lid and empty the dish be- fore repeating the procedure as often as necessary.

Caution: If laundry has been washed at a high temperature, the water draining out of the machine will still be hot! Stop and allow it to cool before proceeding.

21

Image 21
Contents Operating instructions for the W 1903 Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Help protect our environment Before using the first timeDisposal of the packing material Disposal of your old applianceEconomy Optimal usageWater hardness reminder Before using the first timePreparing the Laundry Before washingPrepare the wash load Press the Door button to open the door Load the machine To start a programRecommended load sizes are noted below Close the machine doorEnd of Program After washingClose the drum door Textile care symbols Washing CIroning Adding detergent Using the Starch program to dis- pense liquid starch Adding fabric softener or starchStarch Cottons ProgramsFine / Delicates Drain SpinAdditional options Changing the program sequence To clean the washing machine Cleaning and careCleaning the detergent drawer Pull the drawer out until it stopsCleaning the drain pump and lint trap Cleaning and care Cleaning the water inlet filters To clean the filter in the inlet hoseTo clean the filter in the inlet valve On indicator does not light Problem solving guideSelected program does not begin Check q warning lamp flashes„Pre-wash indicator flashes Excessive build-up of foam Laundry washed with liquid detergent is not cleanLime deposits are visible on the surface of the drum Pilling on fabricsOpening the drum door during a power failure Machine shakes during the spin cycleLaundry is too wet or the machine does not spin at all After sales service Installation surface InstallationRemoving the shipping struts Installation Instructions Leveling the machine Adjust the four leveling feet as fol- lowsWasher / Dryer Stack Connection to the drain sys- tem PlumbingGrounding Instructions Electrical connectionProgrammable functions Program Lock Child safety featureHigh water level only in Cottons rinses 5th Rinse in the Cottons programStep To activate the additional functionsStep Additional function Deleting the additional func- tions Dimensions Technical dataTechnical data Page Page
Related manuals
Manual 44 pages 12.39 Kb