Miele W 1903 operating instructions End of Program, After washing, Close the drum door

Page 11

End of Program

After washing

1Turn the program selector switch to “Finish/Start”

2Press the “ON/OFF” button.

3Press the “Door” button.

Do not attempt to remove laundry from the machine if the drum is turn- ing. You may seriously injure your- self. If the drum turns with the door open, contact the Miele Service De- partment.

4Remove the wash.

5Check the folds in the door seal for any small articles such as buttons or nails which may be lodged there.

Make sure the drum is empty by manually turning it completely around. Items inadvertently left in the machine may be damaged (e.g. shrink) or cause discoloration of other laundry during the next wash cycle.

6Close the drum door.

11

Image 11
Contents Operating instructions for the W 1903 Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of your old appliance Before using the first timeHelp protect our environment Disposal of the packing materialEconomy Optimal usageWater hardness reminder Before using the first timePrepare the wash load Preparing the LaundryBefore washing Close the machine door To start a programPress the Door button to open the door Load the machine Recommended load sizes are noted belowClose the drum door End of ProgramAfter washing Ironing Textile care symbolsWashing C Adding detergent Starch Using the Starch program to dis- pense liquid starchAdding fabric softener or starch Cottons ProgramsFine / Delicates Drain SpinAdditional options Changing the program sequence Pull the drawer out until it stops Cleaning and careTo clean the washing machine Cleaning the detergent drawerCleaning the drain pump and lint trap Cleaning and care To clean the filter in the inlet valve Cleaning the water inlet filtersTo clean the filter in the inlet hose Check q warning lamp flashes Problem solving guideOn indicator does not light Selected program does not begin„Pre-wash indicator flashes Pilling on fabrics Laundry washed with liquid detergent is not cleanExcessive build-up of foam Lime deposits are visible on the surface of the drumLaundry is too wet or the machine does not spin at all Opening the drum door during a power failureMachine shakes during the spin cycle After sales service Removing the shipping struts Installation surfaceInstallation Installation Instructions Leveling the machine Adjust the four leveling feet as fol- lowsWasher / Dryer Stack Connection to the drain sys- tem PlumbingGrounding Instructions Electrical connection5th Rinse in the Cottons program Program Lock Child safety featureProgrammable functions High water level only in Cottons rinsesStep To activate the additional functionsStep Additional function Deleting the additional func- tions Dimensions Technical dataTechnical data Page Page
Related manuals
Manual 44 pages 12.39 Kb