Miele W 1903 operating instructions Technical data

Page 40

Technical data

1.2Specifications

Cold water hose with 3/4” female hose thread connection

Drainage is via a 5 ft. long (1.5m) , 1 1/4 “ (32mm) OD hose.

This washing machine is supplied with a 5 foot long (1.5m) cable with plug for connection to a 120/240 V (208 V) 60 Hz (3-pole-4 wire grounding) power supply.

Power consumption: (Normal cycles)

“COTTONS” without prewash	190°F	1.1 kWh
Water consumption:
“COTTONS” without prewash	17 US gallons (65 l)
Program duration:
“COTTONS” without prewash	190°F	approx. 115 minutes
Spin speed:
Detergent dispenser:
Automatic for:	Prewash
	Mainwash
	Fabric softener or starch
Temperature control:	variable from cold to 190°F

40

Image 40

Contents Operating instructions for the W 1903 Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Before using the first time Help protect our environmentDisposal of the packing material Disposal of your old applianceOptimal usage EconomyBefore using the first time Water hardness reminderBefore washing Preparing the LaundryPrepare the wash load To start a program Press the Door button to open the door Load the machineRecommended load sizes are noted below Close the machine doorAfter washing End of ProgramClose the drum door Washing C Textile care symbolsIroning Adding detergent Adding fabric softener or starch Using the Starch program to dis- pense liquid starchStarch Programs CottonsFine / Delicates Spin DrainAdditional options Changing the program sequence Cleaning and care To clean the washing machineCleaning the detergent drawer Pull the drawer out until it stopsCleaning the drain pump and lint trap Cleaning and care To clean the filter in the inlet hose Cleaning the water inlet filtersTo clean the filter in the inlet valve Problem solving guide On indicator does not lightSelected program does not begin Check q warning lamp flashes„Pre-wash indicator flashes Laundry washed with liquid detergent is not clean Excessive build-up of foamLime deposits are visible on the surface of the drum Pilling on fabricsMachine shakes during the spin cycle Opening the drum door during a power failureLaundry is too wet or the machine does not spin at all After sales service Installation Installation surfaceRemoving the shipping struts Installation Instructions Adjust the four leveling feet as fol- lows Leveling the machineWasher / Dryer Stack Plumbing Connection to the drain sys- temElectrical connection Grounding InstructionsProgram Lock Child safety feature Programmable functionsHigh water level only in Cottons rinses 5th Rinse in the Cottons programTo activate the additional functions StepStep Additional function Deleting the additional func- tions Technical data DimensionsTechnical data Page Page

Related manuals

Manual 44 pages 12.39 Kb