Miele W 1119 operating instructions Select the temperature and spin speed

Page 12

Using the washer

5.Select the temperature and spin speed

The default temperature and spin speed will automatically be selected for each program. However, you can adjust the temperature and spin speed within the parameters of the selected wash program.

^Press the "TEMP" and "SPIN" buttons until the indicator of the desired setting lights.

Program

Spin speed

Normal

High

Wrinkle Free

Med

Sanitize

High

Extra White

High

 

 

Delicates

Low

Woolens /

High

 

 

Silk /

Slow

Handwash /

Med

 

 

Sturdy

Med

Custom

Med-no Spin

 

 

The laundry is spun after the main wash and between the rinse cycles. Reducing the final spin speed will also reduce the rinse spin speeds. If in the programs "Sturdy" and "Custom" a spin speed lower that "Med" is selected, an extra rinse cycle is added to remove any detergent left in the laundry.

12

Image 12
Contents Operating instructions Contents Contents Important Safety Instructions Guide to the washer Control panelBefore using for the first time Using the washer Prepare and sort the laundryGeneral tips Load the laundry Select a program Close the drum doorProgram guide Temperatures Fabric Spin Laundry Care Speed Symbol Woolens Cold MedSilk HandwashSelect wash options if needed Select the temperature and spin speed Special spin options HoldNo spin Add detergent Too little detergent may causeToo much detergent may cause Detergent Normal soilingHeavy soiling Water hardness Water softenerFabric softener Starch Do not exceed the maximum level markSelect Delay Start if needed Cancelling Delay StartStart the program Activate the program lock if necessaryRemove the laundry Cancelling a program Making changes to the programInterrupting a program Adding/removing laundry during a wash program Drum door cannot be opened ifChild Safety Lock Locking the washerElectronic program lock Cleaning the washer Cleaning the detergent drawerClean the siphon tube Washer careCleaning the water inlet filters Clean the drain pump Remove and clean the lint trapRemove the tool Quick Guide Remove this guide for easy referenceQuick Guide Sort the laundryLoad the laundry Select a programSelect the temperature and spin speed Select Delay Start if neededAdd detergent Start the programNormal Options Frequently asked questions Wash program cannot be startedProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Draining the wash water Open the drum door Door hinges on the right sideDoor hinges on the left side Technical Service PC UpdateWarranty terms Optional accessoriesInstallation Instructions Help protect our environment Disposal of the packing materialDisposal of an appliance Installation Front viewBack view Installation site InstallationRemove the shipping struts Do not lift the washer by the drum doorPull out the shipping strut Installing the shipping struts Adjust the four leveling feet Level the washerInstalling the decor panel Installation Shortening the door panelOpen the door Installation beneath a counter Reinstallation of the machine lidWasher stand with drawer Optional accessory hose extension PlumbingWater connection Tips for a hot water connectionDrainage Electrical connection Grounding InstructionsPage Page Alterations rights reserved