Miele W 1119 operating instructions General issues with the washer

Page 33

Frequently asked questions

General issues with the washer

Issue	Possible cause	Solution
The "Oversudsing"	The machine has	Use less detergent in the
indicator lights.	oversudsed.	next wash program.
The Main wash"	There is a fault.	Restart the program.
indicator flashes.		If the fault message appears
		again, call Miele’s Technical
		Service Department.
The washer shakes	The washer’s four feet	Level the machine (see
during the spin cycle.	are not resting evenly	Installation Instructions.)
	on the floor.
There are unusual	There is no fault. Lapping sounds at the beginning
sounds coming from the	and end of the pump process are normal.
drain pump.
A large amount of	The water pressure is	– Clean the water intake
detergent residue	too low.	hose filter under running
remains in the		water and carefully
dispenser drawer.		remove any large
		particles.
		– Select the "Sensitive"
		button.
The fabric softener is	The siphon tube is	Clean the siphon tube (see
not completely	incorrectly positioned	"Cleaning and care-
dispensed, or too much	or clogged.	"Cleaning the detergent
water remains in the		dispenser drawer").
fabric softener
compartment §.

29

Image 33

Contents Operating instructions Contents Contents Important Safety Instructions Control panel Guide to the washerBefore using for the first time Using the washer Prepare and sort the laundryGeneral tips Close the drum door Load the laundry Select a programProgram guide Cold Med Temperatures Fabric Spin Laundry Care Speed Symbol WoolensSilk HandwashSelect wash options if needed Select the temperature and spin speed Special spin options HoldNo spin Add detergent Too little detergent may causeToo much detergent may cause Detergent Normal soilingHeavy soiling Water softener Water hardnessFabric softener Do not exceed the maximum level mark StarchCancelling Delay Start Select Delay Start if neededStart the program Activate the program lock if necessaryRemove the laundry Cancelling a program Making changes to the programInterrupting a program Drum door cannot be opened if Adding/removing laundry during a wash programChild Safety Lock Locking the washerElectronic program lock Cleaning the detergent drawer Cleaning the washerClean the siphon tube Washer careCleaning the water inlet filters Clean the drain pump Remove and clean the lint trapRemove the tool Remove this guide for easy reference Quick GuideSort the laundry Quick GuideLoad the laundry Select a programSelect Delay Start if needed Select the temperature and spin speedAdd detergent Start the programNormal Options Wash program cannot be started Frequently asked questionsProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Draining the wash water Open the drum door Door hinges on the right sideDoor hinges on the left side PC Update Technical ServiceWarranty terms Optional accessoriesInstallation Instructions Help protect our environment Disposal of the packing materialDisposal of an appliance Front view InstallationBack view Installation Installation siteRemove the shipping struts Do not lift the washer by the drum doorPull out the shipping strut Installing the shipping struts Level the washer Adjust the four leveling feetInstalling the decor panel Installation Shortening the door panelOpen the door Installation beneath a counter Reinstallation of the machine lidWasher stand with drawer Plumbing Optional accessory hose extensionTips for a hot water connection Water connectionDrainage Grounding Instructions Electrical connectionPage Page Alterations rights reserved