Miele W 1119 operating instructions Frequently asked questions, Wash program cannot be started

Page 31

Frequently asked questions

,Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.

The following section will help you avoid placing a service call by identifying issues you may encounter while operating the machine:

A wash program cannot be started

Issue

Possible cause

Solution

The display stays

The washer has no

Check to determine if:

blank and no indicator

power.

– the washer is plugged in.

illuminates.

 

– the circuit breaker has

 

 

 

 

been tripped.

The "Child Lock"

The electronic lock

Deactivate the lock function.

indicator flashes.

function is activated.

 

The program will not

The door is not

Close the drum door.

start after pressing the

properly closed.

 

"Start/Stop T" button.

 

 

27

Image 31
Contents Operating instructions Contents Contents Important Safety Instructions Control panel Guide to the washerBefore using for the first time Prepare and sort the laundry Using the washerGeneral tips Close the drum door Load the laundry Select a programProgram guide Handwash Temperatures Fabric Spin Laundry Care Speed Symbol WoolensCold Med SilkSelect wash options if needed Select the temperature and spin speed Hold Special spin optionsNo spin Too little detergent may cause Add detergentToo much detergent may cause Normal soiling DetergentHeavy soiling Water softener Water hardnessFabric softener Do not exceed the maximum level mark StarchActivate the program lock if necessary Select Delay Start if neededCancelling Delay Start Start the programRemove the laundry Making changes to the program Cancelling a programInterrupting a program Drum door cannot be opened if Adding/removing laundry during a wash programLocking the washer Child Safety LockElectronic program lock Washer care Cleaning the washerCleaning the detergent drawer Clean the siphon tubeCleaning the water inlet filters Remove and clean the lint trap Clean the drain pumpRemove the tool Remove this guide for easy reference Quick GuideSelect a program Quick GuideSort the laundry Load the laundryStart the program Select the temperature and spin speedSelect Delay Start if needed Add detergentNormal Options Wash program cannot be started Frequently asked questionsProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Draining the wash water Door hinges on the right side Open the drum doorDoor hinges on the left side Optional accessories Technical ServicePC Update Warranty termsInstallation Instructions Disposal of the packing material Help protect our environmentDisposal of an appliance Front view InstallationBack view Do not lift the washer by the drum door Installation siteInstallation Remove the shipping strutsPull out the shipping strut Installing the shipping struts Level the washer Adjust the four leveling feetInstalling the decor panel Shortening the door panel InstallationOpen the door Reinstallation of the machine lid Installation beneath a counterWasher stand with drawer Plumbing Optional accessory hose extensionTips for a hot water connection Water connectionDrainage Grounding Instructions Electrical connectionPage Page Alterations rights reserved