Miele PW 6065 Plus manual Load the washer, Select a program, Coin mechanism

Page 12

Using the washer

2. Load the washer

^Open the drum door using the a button.

The drum light lights.

^Load the laundry loosely into the drum.

For best results, wash mixed loads of small and large items. This will improve washing effectiveness and help distribute the load evenly.

For the lowest energy and water consumption load the washer to its max. capacity. See "Program guide". Note: Overloading the washer will affect wash results and cause wrinkling.

^Close the drum door.

Close the drum door. To prevent damage to the door seal and clothing, make sure that there are no clothes caught between the drum door and the seal.

3. Select a program

Two program selection possibilities:

Select a "Favorite" by pressing the respective direct select button.

Select from the "Program selection" menu by turning the jog shuttle.

^If desired select "Extras" and/or a delay start time with the respective submenus.

Coin mechanism

If a coin mechanism operates the machine, please regard the displayed request to pay.

If the door is opened after a program has started or if the program is canceled the credit is lost.

12

Image 12
Contents Operating manual Washer PW 6065 Plus Contents Contents Technical Safety UseImportant Safety Instructions Using accessories ChildrenGuide to the washer Control panelDescription of the machine Display function Main menuProgram selection possibility Settings J Menu Program selectionBasic menu of a wash program Before using for the first time Using the washer Sort the laundryGeneral tips Load the washer Select a programCoin mechanism Adding detergent Too little detergent may causeToo much detergent may cause Starting a program At the end of a programFavorites Selecting/Changing a FavoriteBasic menu Select a programSelecting a temperature Selecting the spin speedSelecting Extras Saving a Favorite Assigning a direct select buttonAccessing the sub-menu Extras OptionsPre-wash Starch StopRinse Stop IntensiveWater plus Delay Start Select the sub-menu Delay StartSelect the Delay Start time Starting the Delay StartSpin Spin speedRinse spin Without final spinProgram guide Woollens 40C to cold Silk /30C to coldShirts 60C to cold Denim 104C to coldAdditional programs Kitchen linen 95C to 60CTable linen 60C to 30C Curtains 104C to coldOuterwear 40C to cold Proofing 104F to 86FDisinfection programs HygieneSluice 75C or Sluice 65C Program sequence Main wash Rinse SpinSpecial features in the program sequence Anti-crease High SpinPre-rinse OuterwearTo cancel a program To change a programTo change a program Adding/removing laundry during a wash programDetergent Water hardnessWater softener Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb After sales service PC UpdateOptional accessories RepairsInstallation Instructions Installation Front viewRear view Installation on a base Reinstallation of the machine lidWasher/ Dryer Stack Coin mechanismInstallation site InstallationRemoving the shipping struts Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Maintenance Water connectionCold water connection Extension hosesHot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Settings J Opening the menu SettingsSelecting Settings Leaving the Settings menuLanguage J Suds coolingTime of day ContrastBrightness Selecting the clockTemperature unit Not in current prog. Factory defaultStandby MemoryMenu Settings Supervisor level Entering the codeMenu Settings Supervisor level Sort languages Supervisor levelIntensive Water plus SaveAuto load control Main wash water Pre-wash waterRinse water Water level Cottons Water level Min. ironWash time Cottons Pre-wash temp. CotNo. of programs Disinfection HygieneSluice Pre-wash Kitchen linenOptimize energy Pre-rinse Cottons No. rinses CottonsNo. rinses min. iron Pre-rinse Min. ironLeaving the Settings menu No detergentExternal dispenser Page Page Alteration rights reserved