Miele PW 6065 Plus manual Water connection, Cold water connection, Maintenance, Extension hoses

Page 51

Installation

Water connection

Cold water connection

A water faucet with 3/4" threat must be provided on-site. If none is available the machine must be connected to a water line by a qualified plumber.

The water pressure must be within

14.5-145 psi (1 -10 bar). If the water pressure is greater than 145 psi

(10 bar), a pressure reducer must be installed. If the water pressure is below 15 psi (1 bar), there will not be enough water available for a complete fill.

The cold water hose (blue mark) is not suitable for a hot water connection.

^Connect the cold water intake hose (blue mark) to the cold water valve.

^Turn on the valve(s) and check for leaks.

The water intake hoses are equipped with screen filters. Do not remove these filters except for cleaning.

Maintenance

Replace the water hoses only with genuine Miele hoses.

Extension hoses

Extension hoses (8’ 2" or 13’ [2.5 m or 4 m]) may be obtained from Miele.

51

Image 51

Contents Operating manual Washer PW 6065 Plus Contents Contents Use Technical SafetyImportant Safety Instructions Children Using accessoriesGuide to the washer Control panelDescription of the machine Display function Main menuProgram selection possibility Settings J Menu Program selectionBasic menu of a wash program Before using for the first time Using the washer Sort the laundryGeneral tips Load the washer Select a programCoin mechanism Adding detergent Too little detergent may causeToo much detergent may cause At the end of a program Starting a programSelect a program FavoritesSelecting/Changing a Favorite Basic menuSelecting a temperature Selecting the spin speedSelecting Extras Assigning a direct select button Saving a FavoriteStarch Stop Accessing the sub-menu ExtrasOptions Pre-washRinse Stop IntensiveWater plus Starting the Delay Start Delay StartSelect the sub-menu Delay Start Select the Delay Start timeWithout final spin SpinSpin speed Rinse spinProgram guide Denim 104C to cold Woollens 40C to coldSilk /30C to cold Shirts 60C to coldCurtains 104C to cold Additional programsKitchen linen 95C to 60C Table linen 60C to 30CProofing 104F to 86F Outerwear 40C to coldDisinfection programs HygieneSluice 75C or Sluice 65C Main wash Rinse Spin Program sequenceOuterwear Special features in the program sequence Anti-creaseHigh Spin Pre-rinseAdding/removing laundry during a wash program To cancel a programTo change a program To change a programNormal soiling DetergentWater hardness Water softenerDye removers / Fabric dyes Fabric softener, liquid starchCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb Repairs After sales servicePC Update Optional accessoriesInstallation Instructions Front view InstallationRear view Coin mechanism Installation on a baseReinstallation of the machine lid Washer/ Dryer StackDo not lift the washer by the drum door Installation siteInstallation Removing the shipping strutsPull out the shipping strut out Pull the shipping strut outInstalling the shipping struts Leveling the washer Extension hoses MaintenanceWater connection Cold water connectionHot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Leaving the Settings menu Settings JOpening the menu Settings Selecting SettingsSuds cooling Language JSelecting the clock Time of dayContrast BrightnessMemory Temperature unitNot in current prog. Factory default StandbyEntering the code Menu Settings Supervisor levelMenu Settings Supervisor level Save Sort languagesSupervisor level Intensive Water plusAuto load control Main wash water Pre-wash waterRinse water Pre-wash temp. Cot Water level CottonsWater level Min. iron Wash time CottonsPre-wash Kitchen linen No. of programs DisinfectionHygiene SluicePre-rinse Min. iron Optimize energy Pre-rinse CottonsNo. rinses Cottons No. rinses min. ironLeaving the Settings menu No detergentExternal dispenser Page Page Alteration rights reserved