Miele PW 6065 Plus manual Washer/ Dryer Stack, Installation on a base, Coin mechanism, Height

Page 46

Installation

Washer/ Dryer Stack

Height:

Stacking kit with pull out shelf 66 15/16" (170 cm)

The Miele washing machine can be installed as part of a washer-dryer stack in combination with a Miele tumble dryer. An appropriate stacking kit* is required.

Installation of the stacking kit must be provided by a Miele Service Technician.

Reinstallation of the machine lid

When reinstalling the appliance lid, check the firm fit of the cover at the rear bracket for a safe transport of the dryer.

Installation on a base

The machine can be installed on a steel base open or closed, or be installed on a concrete base.

^Secure the two front feet of the washer with the supplied retaining clips when installing on a concrete base.

^Read the supplied Installation manual.

Coin mechanism

The dryer can be equipped with a coin mechanism*.

The reprogramming necessary for the coin mechanism must be done by a Miele Service Technician.

Empty the coin mechanism regularly. Coins or tokens may get jammed.

Do not install devices to auto- matically turn the washer off, i.e. a clock timer.

*Available from your Miele dealer or Miele.

46

Image 46
Contents Operating manual Washer PW 6065 Plus Contents Contents Technical Safety UseImportant Safety Instructions Using accessories ChildrenControl panel Guide to the washerDescription of the machine Main menu Display functionProgram selection possibility Menu Program selection Settings JBasic menu of a wash program Before using for the first time Sort the laundry Using the washerGeneral tips Select a program Load the washerCoin mechanism Too little detergent may cause Adding detergentToo much detergent may cause Starting a program At the end of a programBasic menu FavoritesSelecting/Changing a Favorite Select a programSelecting the spin speed Selecting a temperatureSelecting Extras Saving a Favorite Assigning a direct select buttonPre-wash Accessing the sub-menu ExtrasOptions Starch StopIntensive Rinse StopWater plus Select the Delay Start time Delay StartSelect the sub-menu Delay Start Starting the Delay StartRinse spin SpinSpin speed Without final spinProgram guide Shirts 60C to cold Woollens 40C to coldSilk /30C to cold Denim 104C to coldTable linen 60C to 30C Additional programsKitchen linen 95C to 60C Curtains 104C to coldOuterwear 40C to cold Proofing 104F to 86FHygiene Disinfection programsSluice 75C or Sluice 65C Program sequence Main wash Rinse SpinPre-rinse Special features in the program sequence Anti-creaseHigh Spin OuterwearTo change a program To cancel a programTo change a program Adding/removing laundry during a wash programWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning the washer Cleaning and CareCleaning the detergent drawer Cleaning the inlet hose filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Open the lint trap door Remove the toolMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb Optional accessories After sales servicePC Update RepairsInstallation Instructions Installation Front viewRear view Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Coin mechanismRemoving the shipping struts Installation siteInstallation Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Cold water connection MaintenanceWater connection Extension hosesHot water connection Drain valve DrainageDrain pump Electrical connection Technical Data Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Menu Settings J To adjust standard settings Selecting Settings Settings JOpening the menu Settings Leaving the Settings menuLanguage J Suds coolingBrightness Time of dayContrast Selecting the clockStandby Temperature unitNot in current prog. Factory default MemoryMenu Settings Supervisor level Entering the codeMenu Settings Supervisor level Intensive Water plus Sort languagesSupervisor level SavePre-wash water Auto load control Main wash waterRinse water Wash time Cottons Water level CottonsWater level Min. iron Pre-wash temp. CotSluice No. of programs DisinfectionHygiene Pre-wash Kitchen linenNo. rinses min. iron Optimize energy Pre-rinse CottonsNo. rinses Cottons Pre-rinse Min. ironNo detergent Leaving the Settings menuExternal dispenser Page Page Alteration rights reserved