Miele PW 6065 Plus manual Children, Using accessories

Page 6

IMPORTANT SAFETY INSTRUCTIONS

If the correct amount of detergent is dispensed, the machine should not need to be descaled. If the washer

needs to be descaled, use a descaling agent with corrosion protection. These special descaling agents can be purchased from the Miele Service department. Use as directed.

Never use solvent based cleaning agents in this machine, this may

result in damage and create toxic fumes. Fire and explosion hazard.

Items which have been pre-treated in solvent based cleaning agents

must be thoroughly rinsed in clean water before being washed in the machine.

Only use dyes specified by the manufacturer as being suitable for

use in a washing machine. Use as directed by the manufacturer.

Dye removers may contain sulphur compounds which cause damage

such as corrosion. Do not use dye removers in this machine.

The drum door glass will be hot when washing at very high

temperatures. Do not touch the glass. Danger of burns!

The stainless steel casing must not come in contact with liquid

cleaning or disinfection agents containing chlorine. They may cause corrosion. Do not store open containers of this agent next to the machine.

Children

Close supervision is necessary when the appliance is used near

children. Do not allow children to play on or in the appliance.

Using accessories

Accessories must only be installed once approved by Miele. Installing

unapproved parts may void the warranty and product liability.

6

Image 6
Contents Operating manual Washer PW 6065 Plus Contents Contents Technical Safety UseImportant Safety Instructions Using accessories ChildrenGuide to the washer Control panelDescription of the machine Display function Main menuProgram selection possibility Settings J Menu Program selectionBasic menu of a wash program Before using for the first time Using the washer Sort the laundryGeneral tips Load the washer Select a programCoin mechanism Adding detergent Too little detergent may causeToo much detergent may cause Starting a program At the end of a programBasic menu FavoritesSelecting/Changing a Favorite Select a programSelecting a temperature Selecting the spin speedSelecting Extras Saving a Favorite Assigning a direct select buttonPre-wash Accessing the sub-menu ExtrasOptions Starch StopRinse Stop IntensiveWater plus Select the Delay Start time Delay StartSelect the sub-menu Delay Start Starting the Delay StartRinse spin SpinSpin speed Without final spinProgram guide Shirts 60C to cold Woollens 40C to coldSilk /30C to cold Denim 104C to coldTable linen 60C to 30C Additional programsKitchen linen 95C to 60C Curtains 104C to coldOuterwear 40C to cold Proofing 104F to 86FDisinfection programs HygieneSluice 75C or Sluice 65C Program sequence Main wash Rinse SpinPre-rinse Special features in the program sequence Anti-creaseHigh Spin OuterwearTo change a program To cancel a programTo change a program Adding/removing laundry during a wash programWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb Optional accessories After sales servicePC Update RepairsInstallation Instructions Installation Front viewRear view Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Coin mechanismRemoving the shipping struts Installation siteInstallation Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Cold water connection MaintenanceWater connection Extension hosesHot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Selecting Settings Settings JOpening the menu Settings Leaving the Settings menuLanguage J Suds coolingBrightness Time of dayContrast Selecting the clockStandby Temperature unitNot in current prog. Factory default MemoryMenu Settings Supervisor level Entering the codeMenu Settings Supervisor level Intensive Water plus Sort languagesSupervisor level SaveAuto load control Main wash water Pre-wash waterRinse water Wash time Cottons Water level CottonsWater level Min. iron Pre-wash temp. CotSluice No. of programs DisinfectionHygiene Pre-wash Kitchen linenNo. rinses min. iron Optimize energy Pre-rinse CottonsNo. rinses Cottons Pre-rinse Min. ironLeaving the Settings menu No detergentExternal dispenser Page Page Alteration rights reserved