Miele PW 6065 Plus manual Fabric softener, liquid starch, Dye removers / Fabric dyes

Page 31

Detergent

Fabric softener, liquid starch

Fabric softener added to the wash program will make fabrics feel softer and will reduce static cling in the dryer.

Liquid starch is a synthetic starch wash used to give fabrics some stiffness. Starch can be included in any wash program as part of the final rinse.

Automatic dispensing of fabric softener or liquid starch

^Add the fabric softener or liquid starch to compartment §. Do not exceed the Max. level mark.

The softener or liquid starch is auto- matically dispensed in the final rinse. At the end of the program a small amount of water remains in the fabric softener compartment §.

If starching frequently, clean the dispenser compartment and especially the siphon tube and conditioner channel. See "Cleaning the detergent drawer".

Separate starch

^Dispense the amount of starch recommended on the packaging.

^Select the Extra "Starch" before starting a program.

The program and the remaining time will stop. The display shows "Starch".

^Dispense the starch directly in the drum.

^Select a spin speed and confirm or press the "Start" button.

Dye removers / Fabric dyes

Do not use dye removers in this washer.

^When dying fabrics in the washer, adhere to the manufacturer’s instructions.

External dispensing

The washer is set up for connection to an external detergent dosage system. A conversion kit is necessary which can be purchased from Miele.

31

Image 31
Contents Operating manual Washer PW 6065 Plus Contents Contents Use Technical SafetyImportant Safety Instructions Children Using accessoriesControl panel Guide to the washerDescription of the machine Main menu Display functionProgram selection possibility Menu Program selection Settings JBasic menu of a wash program Before using for the first time Sort the laundry Using the washerGeneral tips Select a program Load the washerCoin mechanism Too little detergent may cause Adding detergentToo much detergent may cause At the end of a program Starting a programSelect a program FavoritesSelecting/Changing a Favorite Basic menuSelecting the spin speed Selecting a temperatureSelecting Extras Assigning a direct select button Saving a FavoriteStarch Stop Accessing the sub-menu ExtrasOptions Pre-washIntensive Rinse StopWater plus Starting the Delay Start Delay StartSelect the sub-menu Delay Start Select the Delay Start timeWithout final spin SpinSpin speed Rinse spinProgram guide Denim 104C to cold Woollens 40C to coldSilk /30C to cold Shirts 60C to coldCurtains 104C to cold Additional programsKitchen linen 95C to 60C Table linen 60C to 30CProofing 104F to 86F Outerwear 40C to coldHygiene Disinfection programsSluice 75C or Sluice 65C Main wash Rinse Spin Program sequenceOuterwear Special features in the program sequence Anti-creaseHigh Spin Pre-rinseAdding/removing laundry during a wash program To cancel a programTo change a program To change a programNormal soiling DetergentWater hardness Water softenerDye removers / Fabric dyes Fabric softener, liquid starchCleaning the washer Cleaning and CareCleaning the detergent drawer Cleaning the inlet hose filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Open the lint trap door Remove the toolMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb Repairs After sales servicePC Update Optional accessoriesInstallation Instructions Front view InstallationRear view Coin mechanism Installation on a baseReinstallation of the machine lid Washer/ Dryer StackDo not lift the washer by the drum door Installation siteInstallation Removing the shipping strutsPull out the shipping strut out Pull the shipping strut outInstalling the shipping struts Leveling the washer Extension hoses MaintenanceWater connection Cold water connectionHot water connection Drain valve DrainageDrain pump Electrical connection Technical Data Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Menu Settings J To adjust standard settings Leaving the Settings menu Settings JOpening the menu Settings Selecting SettingsSuds cooling Language JSelecting the clock Time of dayContrast BrightnessMemory Temperature unitNot in current prog. Factory default StandbyEntering the code Menu Settings Supervisor levelMenu Settings Supervisor level Save Sort languagesSupervisor level Intensive Water plusPre-wash water Auto load control Main wash waterRinse water Pre-wash temp. Cot Water level CottonsWater level Min. iron Wash time CottonsPre-wash Kitchen linen No. of programs DisinfectionHygiene SluicePre-rinse Min. iron Optimize energy Pre-rinse CottonsNo. rinses Cottons No. rinses min. ironNo detergent Leaving the Settings menuExternal dispenser Page Page Alteration rights reserved