840121900 Ev02.qxd 12/19/03 1:46 PM Page 2
IMPORTANT SAFEGUARDS
When using your flat iron, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
1.Use iron only for its intended use.
2.Verify that the voltage in your home corresponds to that of your appliance.
3.To protect against risk of electric shock, do not immerse the iron in water or other liquids.
4.The iron should always be turned to OFF ( O ) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
5.Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.
6.Always disconnect iron from electrical outlet when filling with water or emptying and when not in use.
7.Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Call our
8.Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
9.Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir.
SPECIAL INSTRUCTIONS
1.To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
2.If an extension cord is absolutely necessary, a
SAVE THESE INSTRUCTIONS
CONSUMER SAFETY INFORMATION
This product is intended for household use only.
This appliance is equipped with a polarized plug. This type of plug has one blade wider than the other. The plug will fit into an electrical outlet only one way. This is a safety feature intended to help reduce the risk of electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way.
Please Read Before First Use:
•During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard.
•Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses.
•Steam vents should be cleared before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting iron steam.
2 | 3 |