JVC THD60 manual Connection for VIDEO1, Connecting a digital component

Do not connect the power cord until all other connections have been made.

Connection using the component video jacks

	Green
From component	Blue
video input
TV
Component video
cord (not supplied)	Red

Audio connection
Connecting a digital component
DBS (Direct	Digital coaxial cable
	(not supplied)
Broadcasting
Satellite)
tuner, etc.	Digital optical cable
	(not supplied)

AFrom digital coaxial output B From digital optical output

For the BNC connection, use a plug adapter (not supplied).

Select the appropriate audio input setting (“OPT” or

“COAX”) before playing back. ( 14)

Connection using the S-video or composite video jack

Composite video cord

(supplied)

TVor

S-video cord (not supplied)

Connecting an analog component

RCA pin plug cord (not supplied)

DVD player,

etc.

A From composite video input	Align the
B From S-video input	5 marks.

Connecting external components

,

AFrom center channel audio output

BFrom front left/right channel audio outputs C From subwoofer output

D From surround left/right channel audio outputs

Connection for “VIDEO1”

Select “VIDEO1” as the source ( 11) for playing a component connected as follows.

Video connection

	HDMI cable
DVD player,	(not supplied)
etc.	From HDMI video output

No sound signal comes into HDMI VIDEO 1 IN terminal. Make audio connection to listen to the sound (see the right column).

To listen to the sound from AUDIO MULTI IN jacks, perform the following procedure:

–Place the speakers by following “Speaker layout

A” ( 6).

–Select “S.SPK R” as the speaker position mode.

( 12)

Select “5.1CH” as the audio input setting before

playing back. ( 14)

8