iPod playback
Set the remote control mode before operation.
Before selecting the video source to play
Make the appropriate setting for video output on the iPod.
Starting playback
Be sure to reduce the volume on the System to the minimum level before connecting an iPod. Adjust the volume after playback has started.
1Connect an iPod while the System is turned off.
Play/pause/search/skip
To do
Start playback
Pause playback
«Hold | «Hold | |
search |
|
|
Skip to the next/previous item*
*Operate on your iPod to skip to the next/previous item while playing back a video.
•The iPod enters sleep mode when you turn off the System or select another source.
•To show still pictures in the iPod, play back in
DO NOT connect or disconnect the iPod when the System is turned on.
DO NOT touch the iPod terminal pins or the connector pins.
When the iPod is not charged through the System, the iPod may not be turned on from the System.
TH-D60/TH-D50:
Docking station for iPod (supplied)
* Attach the dock adapter (supplied for the iPod or separately purchased) before placing the iPod.
( 32)
TH-D5/TH-D4:
*
If the sound is distorted when audio sources with high recording levels are played, you are recommended to deactivate the equalizer on your iPod.
To view a video/picture from the iPod on the TV, connect the System to the TV via the composite or S-
video jacks. ( | 8) |
You cannot send any data to your iPod from the System.
buttons on the sides, then pull it out. The iPod battery is charged only when
“IPod” is selected as the source.
Connection cable for
iPod (supplied)Stand for iPod (supplied)
•Face the
2Turn on the System, then select “IPod” as the
source. ( 11)
“CONNECT” appears on the display. If an iPod is not connected firmly, “NO CONNE” appears.
3Start playing the iPod.
•Press 3 (play button) again if iPod does not start playback.
If the iPod which is not listed in “Playable digital devices”
( 3) is connected, the iPod may not be operated from the System. In this case, deactivate the iPod battery charge function so that the iPod may be operated, but the iPod cannot be charged through the System.
To deactivate the battery charge function
«Hold “P.OFF” appears on the display.
To use the battery charge function, perform the above procedure again. “P.ON” appears on the display.
28