Disc/file playback
The following icons show the available disc/file types for the target function:
Initial settings
Make the following settings before playing back discs/ files.
•Scanning mode ( 
14)
•MONITOR TYPE (
23)
•ON SCREEN LANGUAGE ( 
23)
Set the remote control mode before operation.
For disc playback
For playback of a file on a USB mass storage class device
Operating the touch sensor panel
You can operate the playback control buttons on the center unit simply by touching them.
When you touch any one of these buttons, it lights briefly in blue.
If a still picture is displayed for about 5 minutes, the System automatically dims the screen (screen saver function). You can deactivate the screen
saver function. (
23)
When several types of files (music, picture or movie) are recorded on a disc or device, select
the file type you want to play. (
23)
For messages and icons appearing on the display, see “Messages and icons shown on the TV during
disc/file playback” (
31).
Basic playback
Playing back a disc
1Select “DVD” as the source. (
11)
2
(On the center unit)
3Place a disc on the tray.
Label side up | When placing an 8 cm | |
|
4Start playback.
•JPEG:
•MP3/WMA/WAV: The file control display appears
on the TV. (
22)
Playing back a file on a USB mass storage class device
1Connect a USB mass storage class device while the System is turned off.
USB mass storage class device
2Turn on the System, then select “USB” as the
source. (
11)
Playback starts automatically.
Press 3 (play button) to start playback if the file is not played back automatically.
•JPEG:
•MP3/WMA/WAV: The file control display appears
on the TV. (
22)
15