Sound and monitor settings
Set the remote control mode before operation.
Sound settings and adjustments
Selecting the speaker position mode
Select the speaker position mode according to your speaker
layout (
6).
1Turn off the System. (
11)
2 «Hold
3Select the appropriate speaker position mode
according to your speaker layout (
6).
For speaker layout A
S.SPK R
•The 
R indicator lights on the display.
For speaker layout B
S.SPK F
•The 
F indicator lights on the display.
As the speaker position mode is changed, the following settings are also changed automatically:
–The output level settings of the speakers and subwoofer (see below) are initialized.
–The surround mode (
13) is set to “AUTO SUR.”
Adjusting the output level of the speakers and subwoofer
1 | The items you can adjust differ depending on |
| the selected speaker position mode (see the |
left column).
•When the speaker position mode is “S.SPK R”:
FRNT L = FRNT R = CENTER = SURR L
=SURR R = SUBWFR = (back to the beginning)
•When the speaker position mode is “S.SPK F”:
CENTER = SURR = SUBWFR = (back to the beginning)
2Adjust the output level.
Different output level settings can be stored for the following two groups of sources:
–DVD, USB, IPod, VIDEO1*1, VIDEO2
–FM, AM and VIDEO1*2
When the source is “XM,” this adjustment is not available.
You can also make adjustments from the LEVEL
menu (
24) when the speaker position mode is “S.SPK R.”
*1With “COAX” or “OPT” selected as the audio input setting
(
14)
*2With “5.1CH” selected as the audio input setting
(
14)
12