FM/AM tuner operations
Set the remote control mode before operation.
•Select the desired source (“FM” or “AM”) you want to listen to.
(
11)
Preset tuning
You can preset 30 FM stations and 15 AM stations.
Storing the preset stations
1 | Tune in to the station you want to preset. |
2 | “_ _” flashes on the display. Perform the next |
| step while “_ _” is flashing. |
3Select a preset number, then store the station to that number.
Manual tuning
Tuning in to a station
Store
Enter a preset number*
• “STORED” appears on the display.
Tuning in to a preset station
Select a preset number.*
You can also select a preset number
by pressing PRESET(/CAT) UP or PRESET(/CAT) DOWN.
*For details on using the number buttons, see “How to use the
number buttons” (
10).
You can also tune in to a station automatically. Press and hold TUNING 9/TUNING ( until the station search starts. The system tunes in the first station of sufficient signal strength found automatically.
You can also tune in to the station by pressing cursor 5/Y.
Selecting the FM reception mode
When the stereo FM program currently tuned in is noisy, you can change the FM reception mode to improve the reception.
AUTO | Normally select this. |
MONO | Select to improve reception. (You |
will lose the stereo effect.) | |
|
|
27