JVC CA-MXKB25 manual Standard Recording, CD Synchro Recording, Tape to Tape Recording DUB- Bing

Page 21

Using the Cassette Deck (Recording)

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from an external equipment with this procedure.

To Record Any Sound Source to Tape

Follow these steps to record from any sound source onto a tape in Deck B.

1 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

Tape travelling direction

2 Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

For CD recording, see “CD Synchro Recording” mentioned below.

For dubbing, see “Tape to Tape Recording (Dubbing)” described below.

3 Press the REC START/STOP button on the Unit.

The “REC” indicator and the Tape indicator (3) light up and the System begins recording.

If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “PROTECT” will appear on the display.

To stop during recording, press the REC START/STOP but- ton on the Unit, or press the 7 button.

Recording an AM Station to Tape (Beat Cut)

When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. If this happens, press the FM MODE button on the Remote Control to eliminate the beats.

1 Set to AM station and start recording.

2 Press the FM MODE button on the Remote Control to eliminate the beats.

Each time you press the button, the display changes as shown below:

CUT 1 ï CUT 2

CD Synchro Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program.

1 Prepare CDs. (See page 12.)

Press the CD1-3 button (that you want to make recording), and then press the 7 button.

If you want to record specific tracks only, you need to pro- gram the tracks beforehand. (See page 14.)

If you want to record one CD only, you need to load one CD only.

2 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

3 Press the CD REC START button on the Unit.

“CD REC” appears on the display and the “REC” indicator lights up. Then, the System begins CD Synchro Recording and the tracks on the CD are recorded on the tape.

When recording of the tracks of all CDs is finished, the CD Player and Cassette Deck stop.

If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “PROTECT” will appear on the display.

After the CD Player has played the entire CD or all the pro- grammed tracks, the tape automatically stops.

To stop at any time during the recording process, press the 7button. The CD Player will be paused and the Cassette Deck will be stopped. Press the 7 button again, the CD player will be stopped.

When making SLEEP timer settings while doing CD Syn- chro recording, set enough time to allow for the CD to fin- ish playing, otherwise the power will go off before recording is completed.

Tape to Tape Recording (DUB- BING)

Recording from one tape to another is called dubbing. You can dub tapes simply, with just a single button.

1 Insert the source cassette you want to copy from into Deck A for playback.

2 Press the TAPE A 3 button, and then press the 7 button.

3 Insert a blank or erasable cassette you want to copy onto into Deck B for recording.

4 Press the DUBBING button on the Unit.

Deck A and Deck B will start simultaneously, “DUBBING” appears and the “REC” indicator lights up.

During dubbing, the Deck indicators “A” and “B” light up al- ternately.

If no tape is inserted into Deck A, the DUBBING button will not work.

If no tape is inserted into Deck B, “NO TAPE” will appear on the display.

To stop dubbing, press the REC START/STOP button on the Unit or the 7 button.

During dubbing, you can hear sound effects through the speakers or headphones. However, the sound is dubbed without sound effects.

18

Image 21
Contents CA-MXKB25 If in Doubt Consult a Competent Electrician Important for Laser ProductsAbove ALL Features IntroductionHow This Manual Is Organized Table of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW Antenna About the FM AntennaRear Panel of the Unit Connecting External Equipment Connecting the SpeakersDemo Mode Connecting to the Wall OutletOn the Remote Control Compu PlayECO Mode ECO Turning the Power On and OffBasic Operations Turning the System OnSelecting the Sound Mode Adjusting the VolumeEntering the Number with the Remote Control Numeric Keys Fade-out Muting Fade MutingTuning In a Station Using the TunerSelect a station using one of the following methods One Touch RadioTo Change the FM Reception Mode Presetting StationsUsing the Unit Press the 4 or ¢ button to select the preset numberWhen playing a CD-R or CD-RW Using the CD PlayerFor MP3 discs More about MP3 discsChanging the MP3 Playback Mode To Load CDsTo Unload CDs To Select a Group For MP3 Group mode only Basics of Using the CD Player- Normal PlayTo Play CDs To Select a TrackTo Make a Program Programming the Playing Order of the TracksTo Play the Program You Have Made To Exit and Re-enter Program PlayRepeating Tracks Random PlayTray Lock Function Changing the Display for CDPlaying a Tape Using the Cassette Deck Listening to a TapeTo Fast-Wind a Tape Close the cassette holder gentlyUsing the Cassette Deck Recording Things To Know Before You Start RecordingREC START/STOP CD REC Start Dubbing Tape a Tape B CD Synchro Recording Standard RecordingTape to Tape Recording DUB- Bing To Record Any Sound Source to TapeUsing an External Equipment Listening to the External EquipmentAUX Using the Timers Setting the ClockFixing the Clock Setting the OFF time Example Setting the Daily TimerSetting the on time Example Selecting the music sourceTurning the Daily Timer On and Off Setting the REC Recording TimerSetting the volume level Press the SET button on the UnitSetting the on time you want the System to turn on Turning the REC Recording Timer On and OffSetting the OFF time you want the System to turn off Select the preset station for recordingTimer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for 5 secondsCare And Maintenance Specification TroubleshootingPage Page 0405NSMCREORI CA-MXKB25 Compact Component SystemAbove ALL SP-MXKB25Specifications PrecautionsBefore connecting Daily operations and maintenancePrécautions VorsichtsmaßnahmenTechnische Daten CaractéristiquesVoorzorgen PrecaucionesTechnische Gegevens Especificaciones Precauzioni FörsiktighetsåtgärderSpecificazioni Tekniska Data Varotoimia ForholdsreglerSpecifikationer Tekniset Tiedot