JVC CA-MXKB25 Turning the REC Recording Timer On and Off, Select the preset station for recording

Page 26

Using the Timers

Using the Unit

You can set the time in the same way as for setting the Daily Tim- er.

1 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

2 Press the CLOCK/TIMER button until “ON TIME” immediately after “REC TU” appears on the display.

Each time you press the button, the display changes as follows: DAILY = ON TIME = REC TU = ON TIME* = Clock setting display = Canceled = (back to the beginning)

*: This item should be selected for the REC Timer setting.

Then, the System enters ON-time setting mode. The current ON time appears on the display and the hour digits, “REC” in- dicator and the timer indicator ( ) blink.

3 Setting the ON time you want the System to turn on.

1.Press the 4 or ¢ button to set the hour, then press the SET button.

2.Press the 4or ¢button to set the minute, then press the SET button.

“OFF TIME” appears and then the System enters OFF-time setting mode. The current OFF time appears on the display, and the hour digits blink.

4 Setting the OFF time you want the System to turn off.

1.Press the 4 or ¢ button to set the hour, then press the SET button.

2.Press the 4or ¢button to set the minute, then press the

SET button.

The System enters Preset Station Entering mode.

5 Select the preset station for recording.

1. Press the 4or ¢button to set the band (TUNER FM or TUNER AM), then press the SET button.

2. Press the 4 or ¢ button to set the preset number, then press the SET button.

“SET OK” appears on the display. The “REC” indicator stops blinking and remains lit.

6 Press the STANDBY/ON button to turn off the System, if necessary.

To confirm / change the timer setting, repeat the setting pro-

cedure from the beginning.

When the timer ON-time comes:

•When the timer ON-time comes, the System automatically turns on. The station you have set is played. The Timer indica-

tor ( ) blinks during timer operation.

To stop timer recording, press the 7 button.

•When the timer OFF-time comes, the System automatically turns off.

•If the System is already on when the timer ON-time comes, the REC Timer does not work.

Turning the REC (Recording) Timer On and Off

Once you have set the REC Timer to record a source, the timer set- ting is stored in memory. So, though the REC Timer turns off once it is used, you can recall it at any time.

To cancel the REC Timer temporarily:

1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC TU” appears on the display.

2 Press the CANCEL button on the Unit.

“CANCEL” appears and both the Timer indicator ( ) and the “REC” indicator go out.

To activate the cancelled REC Timer:

1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC TU” appears on the display.

The Timer indicator ( ) and the “REC” indicator blink on the display.

2 Press the SET button on the Unit.

“SET OK” appears on the display. The Timer indicator ( ) and the “REC” indicator remain lit, and the display returns to the original display.

•If the System is unplugged, or a power failure occurs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents CA-MXKB25 Important for Laser Products If in Doubt Consult a Competent ElectricianAbove ALL How This Manual Is Organized FeaturesIntroduction Table of Contents Using the Remote Control AccessoriesHow To Put Batteries In the Remote Control Getting StartedRear Panel of the Unit Connecting the AM MW AntennaAbout the FM Antenna Connecting the Speakers Connecting External EquipmentOn the Remote Control Connecting to the Wall OutletDemo Mode Compu PlayBasic Operations Turning the Power On and OffECO Mode ECO Turning the System OnEntering the Number with the Remote Control Numeric Keys Adjusting the VolumeSelecting the Sound Mode Fade-out Muting Fade MutingSelect a station using one of the following methods Using the TunerTuning In a Station One Touch RadioUsing the Unit Presetting StationsTo Change the FM Reception Mode Press the 4 or ¢ button to select the preset numberFor MP3 discs Using the CD PlayerWhen playing a CD-R or CD-RW More about MP3 discsTo Unload CDs Changing the MP3 Playback ModeTo Load CDs To Play CDs Basics of Using the CD Player- Normal PlayTo Select a Group For MP3 Group mode only To Select a TrackTo Play the Program You Have Made Programming the Playing Order of the TracksTo Make a Program To Exit and Re-enter Program PlayTray Lock Function Random PlayRepeating Tracks Changing the Display for CDTo Fast-Wind a Tape Using the Cassette Deck Listening to a TapePlaying a Tape Close the cassette holder gentlyREC START/STOP CD REC Start Dubbing Tape a Tape B Using the Cassette Deck RecordingThings To Know Before You Start Recording Tape to Tape Recording DUB- Bing Standard RecordingCD Synchro Recording To Record Any Sound Source to TapeAUX Using an External EquipmentListening to the External Equipment Fixing the Clock Using the TimersSetting the Clock Setting the on time Example Setting the Daily TimerSetting the OFF time Example Selecting the music sourceSetting the volume level Setting the REC Recording TimerTurning the Daily Timer On and Off Press the SET button on the UnitSetting the OFF time you want the System to turn off Turning the REC Recording Timer On and OffSetting the on time you want the System to turn on Select the preset station for recordingDuring playback a source, press the Sleep button Setting the Sleep TimerTimer Priority Wait for 5 secondsCare And Maintenance Troubleshooting SpecificationPage Page CA-MXKB25 Compact Component System 0405NSMCREORISP-MXKB25 Above ALLBefore connecting PrecautionsSpecifications Daily operations and maintenanceTechnische Daten VorsichtsmaßnahmenPrécautions CaractéristiquesTechnische Gegevens Especificaciones VoorzorgenPrecauciones Specificazioni Tekniska Data PrecauzioniFörsiktighetsåtgärder Specifikationer ForholdsreglerVarotoimia Tekniset Tiedot
Top Page Image Contents