Top Innovations Comprehensive Guide to SP-660 Steam Press Usage and Safety Instructions

IMPORTANT SAFEGUARDS

WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature.

8. DO NOT handle or use this unit while hands are wet or when not wearing shoes. To avoid falls and other injuries, be sure to dry any wet areas on floors and to stand away from damp surfaces while using steam press.

9. SP-660 Fabric Steam Press is only meant to be used with recommended SP-660 accessories. Other types of accessories are not to be used with Fabric Steam Press. Doing so may cause injuries or damage to unit.

10. Surfaces become hot during use. To avoid injuries, DO NOT touch Pressing Plate or any other surface while using this appliance. DO NOT place arms or hands between Pressing Plate and Ironing Board while unit is in operation.

11. When filling your Fabric Steam Press with distilled water, DO NOT fill Water Reservoir past MAX (300 ml.) line.

12. Before filling unit with water, always take the following steps:

(1) Turn appliance off

(2) Unplug electrical cord

Failure to follow these steps may result in electrical shock and injury.

13.Only water should be used in unit. Other chemical agents will damage unit and can cause injuries.

14.DO NOT operate units steam burst function if steam openings are blocked. Should this occur, shut unit off and unplug.

15.Store your SP-660 Fabric Steam Press in a cool, dry place. Always allow unit to cool completely before storing.

SAVE THESE INSTRUCTIONS!

FOR HOUSEHOLD USE ONLY

4 Top Innovations, Inc.