Top Innovations SP-660 warranty Auto SHUT-OFF, Cleaning the Fabric Steam Press, Proper Storage

CARE & STORAGE GUIDELINES

AUTO SHUT-OFF

The Auto Shut-Off feature of the Fabric Steam Press includes both an Auto Shut-Off and an Auto Wake-Up. These multiple function safety features deactivate electrical power to the heater when the Pressing Plate has been left in closed position against the Ironing Board for more than 10 seconds. Heater

deactivation is signaled by a beeping sound. Heater functionality is restored when the Pressing Plate is lifted back up.

Power to the heater will also be cut if the Pressing Plate is left in the lifted

position without use for approximately 15 minutes (signaled by a continuous beeping sound). The heating ability of the unit can be restored either by resetting the On/Off Switch, or by lowering and then raising the Pressing Plate.

IMPORTANT: Auto Shut-Off does not mean that power to the unit is totally cut off. Power is always on, and the Power Indicator Light will remain illuminated until On/Off Switch is set to “Off” (O) position (FIGURE 1, page 7).

CLEANING THE FABRIC STEAM PRESS

1. Fill Water Reservoir with water using procedure on page 7 of this manual.

2. Place Pressing Cushion in the middle of Ironing Board.

3. Place a clean towel over Pressing Cushion and Ironing Board.

4. Set Temperature Control Dial to the highest setting (LINEN).

5. When Steam Burst Ready Indicator Light illuminates, lower Pressing Plate onto Pressing Cushion.

6. Press Steam Burst Button six times.

7. Allow Pressing Plate to cool.

8. Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this may damage Pressing Plate.

9. Ironing Board fabric cover is removable for cleaning. Hand wash only with mild detergent.

PROPER STORAGE

1. Once pressing is complete, immediately turn unit off and unplug power cord from electrical outlet.

2. Allow unit to cool completely (at least 30 minutes).

3. Lower Pressing Plate down, and turn Locking Knob to “Lock” position.

4. Wrap up power cord and place in Cord Storage Compartment.

5. Store all accessories safely away, preferably near Fabric Steam Press.

6. Store Fabric Steam Press in a cool, dry place.

Top Innovations, Inc. 9