Mounting the Atrium Sub10, Deck Mount | Polk Audio Sat30 specification

MOUNTING THE ATRIUM Sub10

The Sub10 can be located anywhere you desire.

DECK MOUNT

1.Determine where you want to locate the subwoofer.

2.Measure the center-to-center distance between the key-hole slots and install two #10 mounting screws into the deck, leaving 1/4" of the screws exposed above the surface.

3.Place the subwoofer onto the pan head screws and rotate the Sub10 clockwise so that the keyhole slots lock down onto the pan head screws.

GARDEN PLACEMENT

You may locate your Atrium Sub10 anywhere you can run speaker wire. If you place your subwoofer in a garden bed, upon soft ground or mulch, we recommend you place it on a paver or other hard surface. This will prevent mulch or dirt from building up underneath the subwoofer, which must remain clear for optimum performance and to prevent damage to driver.

An optional accessory grille is available to prevent wildlife from taking residence under your subwoofer (Part# AM3387-A).

Note: The Sub10 has a built-in security eyebolt that enables you to anchor it to its location.

1/4"

(.635cm)

Keyhole Slots

Security

Eyebolt

ATRIUM Sat30 & ATRIUM Sub10

HOOKUP DIRECTIONS:

Connect only two Sat30 Loudspeakers per stereo channel.

(Not sold in pairs.)

The Atrium Sat30 and Atrium Sub10 each come with 3 feet of CL3 speaker wire, which is rated for underground burial. The Sat30 has two conductors—one red that is la- beled “+” and one black that is labeled “–“. The Sub10 has four conductors (white, green, red and black) because it has a dual voice coil. Follow the correct polarity during hookup to avoid performance issues and/or damage to your amplifier.

A standard configuration for outdoor listening includes two Sat30 loudspeakers and a single Sub10 subwoofer.

Amplifier
Left								Sat30 Left
Left								Sub10 Left (coil 1)


Right								Sat30 Right


								Sub10 Right (coil 2)

Connect one Sat30 loudspeaker to the +/– terminals of the amplifier’s left output chan- nel (red wire to “+” and black wire to “–“). Connect the other Sat30 loudspeaker to the +/– terminals of the amplifier’s right output channel. Next, connect the white and green wires of the Sub10 to the amplifier’s left output channel and connect the red and black wires of the Sub10 to the amplifier’s right output channel.

Amplifier		Sat30	Sat30	Sub10
Output		#1	#2

	+	Red		White
Left
Left	–	Black		Green
	–	Black		Green

	+		Red	Red
Right
Right	–		Black	Black
	–		Black	Black

An alternate configuration utilizes the left and right outputs from separate amplifiers to drive the Sat30’s and the Sub10.

Bi-Amplifier

Sat30 Left

Left

Right Sat30 Right

Sub10 Left (coil 1) Left

Right									Sub10 Right (coil 2)

Connect one Sat30 loudspeaker to the +/– terminals of the first amplifier’s left channel output and connect the other Sat30 loudspeaker to the +/– terminals of the first amplifier’s right channel output. Connect the white and green wires of the Sub10 to the second amplifier’s left channel and the red and black wires

to the second amplifier’s right channel.

Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

Customer Service Hours of Operation: Monday-Friday, 9AM-6PM EST

polkcs@polkaudio.com

Sat30, Sub10 specifications

Polk Audio has long been a name synonymous with quality sound systems, and the Polk Audio Sub10 and Sat30 stand as a testament to their commitment to delivering high-performance audio. Together, these components form an impressive home theater setup, offering an immersive listening experience that excels in both music and movie playback.

The Polk Audio Sub10 is a compact yet powerful subwoofer designed to produce deep, resonant bass that enhances the audio experience. With a 10-inch dynamic balance driver and a built-in amplifier rated at 100 watts RMS, the Sub10 effortlessly reproduces low frequencies while ensuring clarity and precision. Its frequency response range extends down to 30 Hz, making it capable of delivering the punch required for action movies as well as the depth needed for music genres like hip-hop and classical. The front-firing port design further aids in minimizing distortion and optimizing performance, allowing users to place it in a variety of locations within their living space without compromising sound quality.

Complementing the Sub10, the Sat30 satellite speakers offer a sleek and versatile design that blends seamlessly into any decor. Each Sat30 speaker features a 4-inch dynamic balance driver and a 1-inch silk dome tweeter, engineered to deliver clear mids and crisp highs. This compact design allows for flexible placement, whether mounted on walls, placed on shelves, or used on stands. The speakers are built to handle up to 100 watts of power, ensuring they can keep up with the Sub10's output. The wide dispersion pattern promotes a more immersive listening experience, making it feel as though the sound is coming from all around rather than just from the speakers.

One of the standout technologies in both the Sub10 and Sat30 is Polk Audio's Dynamic Balance technology, which helps eliminate distortion and enhances sound clarity. This proprietary approach to speaker design ensures that every note is reproduced accurately, offering listeners an authentic audio experience. Additionally, the Sub10 features a variable low-pass crossover and phase control, allowing users to fine-tune the bass response to suit their personal preferences and room acoustics.

Overall, the Polk Audio Sub10 and Sat30 combination presents an exceptional choice for those who seek high-quality sound without sacrificing aesthetics or versatility. Whether you’re watching your favorite films, enjoying music, or gaming, this setup promises to elevate your audio experience, ensuring you don’t miss a single beat. With Polk Audio's reputation for excellence, investing in the Sub10 and Sat30 guarantees a significant enhancement to any home entertainment system.