Ault

Leak in the drain hose.

Water pressure too low.

ault	Possibl	caus			Action

Spin speed cannot	Spinning	is already in progress; during		spinning Selthect speed before spinning.
be selected.	speed cannot be		changed.
	Program	selector	is setDrainto ; spinning	is not	If required, select another program.
	possible	with this	program.

Child lock cannot beThe program has already started. selected.

Child lock can be selected in pause mode.

•Water tap closed?" Strainers in supply hose clogged. indicated in the

display field.

Clean and dry the detergent dispenser; see Page30

Use the dispensing aid for liquid detergents.

Turn on water tap.

Program continues.

Eliminate the cause.

Clean the filter; see Page32.

Eliminate the cause.

Water	cannot be		This is not a fault.
seen	in	drum.	The water lies below the visible part	of the	drum.
Washing		solution is	Loose debris is blocking the pump.		Clean	the	pump	(refer to	Page31).
not completely
drained.		•Pump	The water drainage pipe and/or drain	hose is	Clean	the	water	drainage	pipe and/or drain hose.
blocked?" indicated			blocked.
in the display field.

Water is flowing outThe thread of the supply hose is not tight. from underneath the

machine.

Foam coming out ofToo much detergent. the detergent

dispenser.

Tighten	the	thread.
Replace	the	drain	hose.
Mix 1	tablespoon		of fabric softener with ½litre/1pt

of water and pour into chamber of the detergent dispenser.

Reduce the amount of detergent next time.

Repeated spinning. This is not a fault.

The imbalance compensation system is aattempting to balance the load through repeated spins.

Always load largeand small items together into the drum.

The laundry	was notLarge items of clothing became entangled and couldAlways load largeand small items together into the
spun.	not be distributed evenly in the drum. For reasonsdrum.of
	safety the high6speed spin cycle was automatically
	suppressed.

￿ault