Bosch Appliances WFR 2450, WFR 2460 Soaking, Bleaching, Decolorizing Canceling Active program

Page 27
￿ Open the loading door.
￿ Put in/remove the laundry. ￿ Close the loading door.
￿ Press theStart/Pause button. Program continues.
Child lock is re6activated.
The indicator light shines (yellow).

Child lock activated

￿Temporarily deactivate the child lock. See￿Page￿￿3.

Soaking

The Soak setting is used to pre6treat heavily stained items:

i

i

If theStart/Pause indicator light flashes (yellow), the door cannot be opened for reasons of safety (water level, temperature or speed too high).

In the display it successively is indicated: •Pause￿,

•Door cannot be opened￿.

If theStart/Pause indicator light flashes (red), the laundry can be topped up or removed prematurely.

In the display it successively is indicated: •Pause￿,

•Door can be opened￿.

￿Load laundry of the same color.

￿Add the soaking agent to chamberI according to the manufacturers specifications.

￿Turn the program selectorSoakto .

The Start/Pause indicator light flashes (red).

￿Press theStart/Pause button.

The program starts.

The indicator light shines (red).

iThe soak cycle lasts ￿ hours with the temper ture held at 95￿°F/3C￿￿ . It is ended with a￿shor spin cycle. All the water is pumped out.

Bleaching

WARNING

DO NOT use liquid chlorine bleach in this machine. A powder oxygen based bleach or non6chlorinated based products are acceptable.

Decolorizing

Canceling

active program

 

 

 

 

 

 

 

 

 

 

CAUTI￿N

 

 

If you would like to terminate a program and

 

 

 

 

 

 

 

 

 

 

Decolorants

may

contain sulphur or

chlorine.

remove the laundry:

 

￿ If the child

lock is active, temporarily

 

These substances

can cause parts

of the wash6

deactivate;

machine

to￿corrode. Do not decolorize items

see Page￿￿3.

 

ing

 

of

laundry in the

washing machine.

 

 

 

 

 

 

 

￿ Turn the program selectorDrainto orSpin.

i

If a program is interrupted at a high tempera6 ture, leave the laundry to cool down until glass is not hot to the touch.

￿Press theStart/Pause button.

￿Wait until the program ends.

￿If the child lock is active, deactivate again temporarily; see Page￿￿3.

￿Open the loading door.

￿Unload the laundry.

i

If a program is interrupted at a high temperature, the door may remain locked until￿the appliance has cooled down.

i

If the program is terminated by switching off￿the appliance, the door may remain locked.

27

Image 27
Contents Page Contents Safety These Njury Disposal nformationNtended Use OfsuffocatonYour New WashingMachine Control panel For best stain removal and cleaning resultsSelecting Language Before Using ForUsing For the First Time First TimeDgrs of irt Prpring, Sorting n Loing th LunrySorting th lunry Prpring thlunryWarm Loading the laundry Risk F ExplsinCautin Laundry Detergents AndAdditivesRSK of Posonng Extra Cycle Program Selector ProgramsAndFunctions Basic ProgramsDisplay Field Option buttonsStart/Pause Butt Washing with Standard Settings Quick Overview Washing with Individual SettingsSpin Speed Program finishedat Reduced ironing Signal Child lock Standard time/Daylightsaving time Set clock Resetting the settings Durng Washng Decolorizing Canceling Active program SoakingBleaching Aftr shing Emergency Lock Release RSK of ScaldngCauton User Maintenance Instructions Risk of Electric ShockRisk of Explosion Risk of Scalding Cleaning the drain pumpCleaning water inlet strainers Descaling Washing machine 944-294 Customer ServiceRisk Electric Troubleshooting Minor FaultsFuse Ault Fault Displays Installation Connection AndTransportation Safety informationRisk of Injury Any dampness lift Installation area DimensionsBuiltin Installation Levelling Procedure Rmovin th transport bolts Insert the covers Watr onntion Hos An ablMin 10 mm Grounding Instructions Electrical connectionWarnng Transport, e.g.when moving1001 am 5500 007