Bosch Appliances WFR 2450, WFR 2460 manual Min 10 mm

Connection options

A Cold water connectionand

B Hot water connection(max.￿140￿°F // 60￿°C)

min￿ 10 mm

or Cold water connection only with Y!piece

Water drainage

CAUTION

Do not bend or pull the water drainage hose.

Height difference between the placement area of￿washer and the drainage point: Maximum￿110￿cm￿// 43￿inches.

Standpipe or In Wall Installation

min￿

10 mm

￿After the connection:

Turn on the water completely, and check whether connection points are watertight.

CAUTION

The connection points are under full water pressure. Check seal with tap fully open.

￿Use the U-bracket. Attach the U-bracket to th end of the hose and insert end of hose into standpipe or wall drain.

￿ Use a	strap	or cable	tie connected to U-brac
to hold hose in place.
Drainage	into	a siphon

￿Secure the connection point with a hose band clip.

45