Operating Instructions
Add Washing Detergent and/Care Agent
3 | Refer to the information on washing detergents and care agents, see |
| section entitled “Washing Detergents and Care Agents“. |
01. Pull out the washing powder drawer as far as it will go.
2.Fill with washing detergent / care agent
Compartment for in-wash stain treatment
only for additional programme ä(STAIN)
Compartment for main wash detergent (powder only) and water softener if required
(If you are using water softener, add it to the main wash detergent.)
Compartment for liquid care agent (Conditioner, finisher, starch)
Important! Do not fill the compart- ment above the MAX mark. If necessary, dilute viscous agent up to the MAX mark, and dissolve starch powder.
Note: It is normal for a small amount of water to be left in the compartment for liquid care agent; this will not affect the wash results.
Compartment for pre-wash detergent/ soaking agent
only for k(PRE WASH) or q (SOAKING) programmes
3.Push the drawer in fully.
3 If using liquid detergent / tablets:
Use containers supplied by the detergent manufacturers to add liquid detergent or tablets. Follow the instructions on the washing detergent package.
19