Installation and connection instructions
Water inflow
A pressure hose of 1.35m in length is supplied.
If a longer inflow hose is required, only a
–Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing machines without
–Hose sets in lengths of 2.0m, 2.9m and 3.5m are available for washing machines with
Important! Never cut into pieces in order to extend the hoses!
3 | Sealing rings are supplied either in the plastic |
| nuts of the hose screw connection or in the enc- |
losed pack. Do not use other seals!
0 1. Connect the hose with the angled connection to the machine.
Important!
– Do not lay the inlet hose verti- cally downwards, instead run it to the right or left as shown in the diagram.
– Tighten the hose screw connec- tion only by hand.
2. Connect the hose with the
straight connection to a water valve with a screw thread R 3/4 (inches).
Important! Only tighten the screw connection manually.
3. By slowly opening the water valve before putting the washing machine into operation, check that the connection is free of leaks.
41