AEG W 730 manual Compensate for floor unevenness

Page 39

Installation and connection instructions

Compensate for floor unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in the range +10 .. -5mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the threa-

ded foot as far as it will go.

2. Adjust the screw feet so that the unit is horizontal and stable. The

unit must not wobble over when loaded.

3. If necessary, check the setting

with a spirit level.

Important! Minor unevenness of the floor surface should never be levelled out by laying pieces of

wood, card or similar materials, but rather should always be com-

pensated for by adjusting the adjustable feet.

39

Image 39
Contents Lavamat W Please read this user information carefully Dear CustomerContents What to do if Separate SpinWarranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use General Safety Child SafetyDisposing of your old appliance DisposalEnvironmental tips Disposing of the Packaging MaterialUnit description Front viewDrawer for Washing Powder and Care Agent PRE Wash Control PanelProgramme Knob Programme group t COTTONS/LINEN11 Woollens Programme group EASY-CARESProgramme group sWOOLLENS/ÃDELICATES SpinSoaking Temperature SelectorPump OUT Additional Programme ButtonsStain ON/OFF buttonConsumption values and time requirements Before the First WashTempera Filling Water Energy Time Programme knob Sort washing and prepare Prepare washing cycleWashing Types and Care Symbols Water Hardness dH How much detergent and care agent?Water Softener Water Hardness DetailsAdd the washing When the wash programme has been completedRunning a Wash Cycle Brief InstructionsCompartment for pre-wash detergent/ soaking agent If using liquid detergent / tabletsAdd Washing Detergent and/Care Agent Compartment for in-wash stain treatmentSetting the Wash Programme Start the Wash Programme Changing the Spin Speed/Selecting Rinse HoldProgramme progress display Changing settingsWash Programme Progress Changing/Interrupting the Wash ProgrammeOnce the programme is completed Wash Cycle Completed/Removing WashingIf q Soaking has been selected If o Rinse Hold has been selectedWashing Programme TablesSeparate Spin Dry weightSeparate Rinse Separate Conditioning/Starching/FinishingDetergent Drawer Cleaning and CareMain door Washing DrumCleaning the drain pump Remedying Faults Problem Possible Cause RemedyWhat to do if Feet are not correctly set Drawer æfor care If at the end of the last rinse foam is still visible If the washing results are not satisfactoryCarrying out emergency drainage If there are still grey spots on the washingWhen the water is completely drained Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transportation protection Pull both hose holders off Unit with a strong pull Prepare the installation place Installation on a concrete baseInstallation on vibrating floors Compensate for floor unevenness Electrical connection Water connectionPermissible water pressure Water inflow Water drain-off inside a basin Water drainTechnical data DimensionsDelivery heads over 1m Otros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandEstonia Latavia Poland Croatia New ZealandBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanHungary Israel Malaysia Saudi ArabiaJapan Singapore Slovenia Thailand Slovakia Rep South AfricaPage Page Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG