AEG W 730 manual Pull both hose holders off Unit with a strong pull

Page 37

Installation and connection instructions

2.Pull both hose holders off the

unit with a strong pull.

3	The special key E and the caps D
	(2 each) and G (1 each) are sup-

plied with it.

3. Unscrew the two screws with the special spanner.

4. Unscrew the 4 screws B with spe- cial spanner E.

5. Remove the transport rail C.

6. Screw the 4 screws B back in.

7. Close the 2 large holes with the caps D.

Important! Press in the caps with sufficient strength so that they engage in the rear panel (protects the inside of the units against splash water).

8. Remove the screw F, including the compression spring, with the spe- cial spanner E.

9. Close the hole with the cap G.

Important! Press in the cap with sufficient strength so that it en- gages in the rear panel (protects the inside of the unit against splash water).

Image 37

Contents Lavamat W Please read this user information carefully Dear CustomerContents What to do if Separate SpinWarranty conditions / Customer service centres Before Using for the First Time SafetyCorrect Use General Safety Child SafetyEnvironmental tips DisposalDisposing of the Packaging Material Disposing of your old applianceFront view Unit descriptionDrawer for Washing Powder and Care Agent Programme Knob Control PanelProgramme group t COTTONS/LINEN PRE WashProgramme group sWOOLLENS/ÃDELICATES Programme group EASY-CARESSpin 11 WoollensPump OUT Temperature SelectorAdditional Programme Buttons SoakingStain ON/OFF buttonBefore the First Wash Consumption values and time requirementsTempera Filling Water Energy Time Programme knob Sort washing and prepare Prepare washing cycleWashing Types and Care Symbols Water Softener How much detergent and care agent?Water Hardness Details Water Hardness dHRunning a Wash Cycle When the wash programme has been completedBrief Instructions Add the washingAdd Washing Detergent and/Care Agent If using liquid detergent / tabletsCompartment for in-wash stain treatment Compartment for pre-wash detergent/ soaking agentSetting the Wash Programme Start the Wash Programme Changing the Spin Speed/Selecting Rinse HoldWash Programme Progress Changing settingsChanging/Interrupting the Wash Programme Programme progress displayIf q Soaking has been selected Wash Cycle Completed/Removing WashingIf o Rinse Hold has been selected Once the programme is completedWashing Programme TablesSeparate Rinse Dry weightSeparate Conditioning/Starching/Finishing Separate SpinDetergent Drawer Cleaning and CareMain door Washing DrumCleaning the drain pump Problem Possible Cause Remedy Remedying FaultsWhat to do if Feet are not correctly set Drawer æfor care Carrying out emergency drainage If the washing results are not satisfactoryIf there are still grey spots on the washing If at the end of the last rinse foam is still visibleWhen the water is completely drained Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transportation protection Pull both hose holders off Unit with a strong pull Installation on a concrete base Prepare the installation placeInstallation on vibrating floors Compensate for floor unevenness Water connection Electrical connectionPermissible water pressure Water inflow Water drain-off inside a basin Water drainDimensions Technical dataDelivery heads over 1m Autres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroBulgaria Kuwait/Arabian Gulf Croatia New ZealandCyprus Lebanon Oman Estonia Latavia PolandJapan Singapore Slovenia Israel Malaysia Saudi ArabiaThailand Slovakia Rep South Africa HungaryPage Page Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG