AEG 88730 manual Washing Programme Progress, Programme progress display, Multi-display

Page 24

Operating Instructions

Washing Programme Progress

Programme progress display

Prior to the start, the programme steps chosen are displayed by the programme progress display. During the washing programme the current programme step is displayed.

	Multi-display
	The expected time remaining (in minutes) to


	the end of the programme is shown in the
	multi-display.
3	The multi-display indicates the estimated duration, in minutes, of the
	programme. These timings are estimates and can be varied and influ-

enced by incoming water temperature, type and quantity of laundry, out of balance spin detection and foam detection. During the pro- gramme countdown the remaining time can be recalculated due to any of the above factors.

Changing the Spin Speed

During the washing programme, the spin speed can still be changed or the RINSE HOLD can be set.

Other settings cannot be changed.

Stopping the programme

0Turn the programme selector to OFF in order to stop the washing pro- gramme prematurely.

3	The washing programme can be interrupted at any time with the
	START/PAUSE button and can be continued again by pressing this but-

ton again.

24

Image 24

Contents ÖKO-LAVAMAT 88730 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Programme selectorWoollens / P hand wash Silk / P hand washProgramme option buttons Consumption data and wash times Run time displayWhat does Update mean? Anti-flood Aqua Control + Aqua AlarmBefore the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingSetting the delay timer/soaking duration Delay timerChanging the spin speed/Selecting Rinse Hold Soaking durationOpening and closing the door Load the washingIf using liquid detergent / tablets Add detergent / conditionerConditioners Open the detergent dispenser drawer Adding detergent / conditionerStart the washing programme START/PAUSE button againIf the time preselection is set Washing Programme Progress Programme progress displayMulti-display Changing the Spin SpeedNot function if the power supply is interrupted Washing cycle complete/Removing the washingRemove the washing Turn the programme selector to OFF Programme tables WashingSeparate rinse/conditioning/starching Separate spinMaintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifLow Not been removed Turn off the tap, then re If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Unlock featureEmergency unlocking of the door Supply firstSetting the additional rinse function Cancelling the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterSetting the water cooling function Cancelling the water cooling functionWater Cooling Additional Rinse and Water CoolingCancelling programme protection Programme protectionSelect programme protection Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation and connection instructions Installation Safety PrecautionsInstallation of the appliance When transporting the unit with a sack trolleyTransporting the appliance Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Connection to the machineWater Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Warranty conditions Great BritainIndex Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG