AEG 88730 Installation of the appliance, Transporting the appliance, Remove transport packaging

Page 42

Installation and connection instructions

Installation of the appliance

Transporting the appliance

•Do not place the washing machine on its front or on its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet.

•Never transport the unit without the transport packaging and bolts/ bars. Do not remove the transport packaging until the appliance is at the installation location. Transporting the unit without the transport packaging can damage it.

•Never lift the appliance by the door.

When transporting the unit with a sack trolley:

•Attach the sack trolley only at the side. The shovel of the sack trolley must not be longer than 24 cm, otherwise the float switch can be de- stroyed.

Remove transport packaging

Important! It is essential to re- move the transport packaging be- fore putting the appliance into operation. Keep all parts of the transport packaging in a safe place for future use.

0 1. Open both hose holders on the appliance's rear side and remove the hoses and mains cable.

2.Pull both hose holders off the ap-

pliance with a strong pull.

42

Image 42

Contents ÖKO-LAVAMAT 88730 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Programme selectorWoollens / P hand wash Silk / P hand washProgramme option buttons Consumption data and wash times Run time displayWhat does Update mean? Anti-flood Aqua Control + Aqua AlarmBefore the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed/Selecting Rinse Hold Setting the delay timer/soaking durationDelay timer Soaking durationOpening and closing the door Load the washingConditioners Open the detergent dispenser drawer If using liquid detergent / tabletsAdd detergent / conditioner Adding detergent / conditionerStart the washing programme START/PAUSE button againIf the time preselection is set Multi-display Washing Programme ProgressProgramme progress display Changing the Spin SpeedNot function if the power supply is interrupted Washing cycle complete/Removing the washingRemove the washing Turn the programme selector to OFF Programme tables WashingSeparate rinse/conditioning/starching Separate spinMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifLow Not been removed Turn off the tap, then re If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterEmergency unlocking of the door When the water is completely drainedUnlock feature Supply firstAdditional Rinse RINSE+ Setting the additional rinse functionCancelling the additional rinse function Helpful to rinse with extra waterWater Cooling Setting the water cooling functionCancelling the water cooling function Additional Rinse and Water CoolingCancelling programme protection Programme protectionSelect programme protection Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Connection to the machineWater Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Warranty conditions Great BritainIndex PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG