AEG 88730 If the washing results are not satisfactory, If there are white residues on the washing

Page 34

Operating Instructions

	Problem	Possible Cause	Remedy
	When pressing a pro-	The selected programme op-
	gramme option button
		tion cannot be combined	Make another selection.
	the corresponding dis-
		with the set programme.
	play does not light up.

		Programme safeguard	Turn the programme selec-
	The programme	switched on; The pro-
			tor back to the original posi-
	progress indicator	gramme selector was acci-
			tion (see "Programme
	flashes constantly.	dentally moved during the
			protection“).
		washing cycle.

If the washing results are not satisfactory

If the washing turns greyish and limescale deposits are present in the drum

•Insufficient detergent has been added.

•Incorrect detergent was used.

•Stains were not pre-treated.

•Programme or temperature was not set correctly.

•If using modular detergents, the individual components were not used in the correct ratio.

If there are still grey stains on the washing

•Soiled garments with ointments, grease or oils were washed with in- sufficient detergent.

•The temperature selected for the wash was too low.

•A frequent cause is that fabric softener - particularly a concentrated one - has come into contact with the washing. Wash out these types of stains as soon as possible and use the fabric softener carefully.

If after the last rinse foam is still visible

•Modern detergents can still cause foam in the final rinse cycle. How- ever, the washing is still sufficiently rinsed.

If there are white residues on the washing

•These are insoluble contents of modern detergents. They are not the result of an insufficient rinse. Shake out the washing or brush it off. Turn the washing inside out before washing it. Review your choice of detergent and if necessary use liquid detergent.

34

Image 34

Contents ÖKO-LAVAMAT 88730 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorWoollens / P hand wash Silk / P hand washProgramme option buttons Consumption data and wash times Run time displayWhat does Update mean? Anti-flood Aqua Control + Aqua AlarmPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed/Selecting Rinse Hold Setting the delay timer/soaking durationDelay timer Soaking durationOpening and closing the door Load the washingConditioners Open the detergent dispenser drawer If using liquid detergent / tabletsAdd detergent / conditioner Adding detergent / conditionerSTART/PAUSE button again Start the washing programmeIf the time preselection is set Multi-display Washing Programme ProgressProgramme progress display Changing the Spin SpeedWashing cycle complete/Removing the washing Not function if the power supply is interruptedRemove the washing Turn the programme selector to OFF Programme tables WashingSeparate rinse/conditioning/starching Separate spinMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpWhat to do if Trouble ShootingLow Not been removed Turn off the tap, then re If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterEmergency unlocking of the door When the water is completely drainedUnlock feature Supply firstAdditional Rinse RINSE+ Setting the additional rinse functionCancelling the additional rinse function Helpful to rinse with extra waterWater Cooling Setting the water cooling functionCancelling the water cooling function Additional Rinse and Water CoolingProgramme protection Cancelling programme protectionSelect programme protection Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Connection to the machineWater Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty conditions Great BritainIndex PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG