AEG 88730 Carrying out an emergency emptying, Have a flat container on hand to catch the water

Page 35

Operating Instructions

Carrying out an emergency emptying

If the washing machine no longer pumps out the water, emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose.

1Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before you carry out the emergency emptying.

01. Have a flat container on hand to catch the water.

2. Pull down the flap in the right corner of the base strip outwards and pull it off.

3. Remove the emergency emptying hose from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency emp- tying hose by turning it anticlockwise and pull it out.

The water runs out. Depending on the amount of water, it may be necessary to empty the collecting vessel several

times. To do this, close the emergency emptying hose temporarily with the plug.

Discard the water from the container, replace it under the emergency emptying hose and remove the plug from the hose.

35

Image 35
Contents ÖKO-LAVAMAT 88730 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control panelSilk / P hand wash Woollens / P hand washProgramme option buttons Run time display Consumption data and wash timesAnti-flood Aqua Control + Aqua Alarm What does Update mean?Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Possible programme options to suit the type of washing Setting the Washing ProgrammeSoaking duration Setting the delay timer/soaking durationDelay timer Changing the spin speed/Selecting Rinse HoldLoad the washing Opening and closing the doorAdding detergent / conditioner If using liquid detergent / tabletsAdd detergent / conditioner Conditioners Open the detergent dispenser drawerIf the time preselection is set Start the washing programmeSTART/PAUSE button again Changing the Spin Speed Washing Programme ProgressProgramme progress display Multi-displayRemove the washing Turn the programme selector to OFF Not function if the power supply is interruptedWashing cycle complete/Removing the washing Washing Programme tablesSeparate spin Separate rinse/conditioning/starchingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpLow Trouble ShootingWhat to do if Not been removed Turn off the tap, then re If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingSupply first When the water is completely drainedUnlock feature Emergency unlocking of the doorHelpful to rinse with extra water Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Additional Rinse and Water Cooling Setting the water cooling functionCancelling the water cooling function Water CoolingSelect programme protection Cancelling programme protectionProgramme protection Cancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Disposed of safely Permanent ConnectionWater pressure Water connectionConnection to the machine Inlet Hose ConnectionWater Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG