AEG 88730 manual Not been removed

Operating Instructions

Problem	Possible Cause	Remedy
	The transport packaging has	Remove transport packaging
		according to the installation
	not been removed.
		and connection instructions.
		Adjust the feet according to
	The machine is not level.	the installation and connec-
		tion instructions.
The washing machine	There is very little washing in	This does not impair the
vibrates during opera-
tion or is unstable.	the drum (e.g. only one	function.
	dressing gown).
	The water could not be com-	Check the drain hose and re-
		move any kink if necessary,
	pletely pumped out before	or clean the drain pump and,
	spinning because the drain-
		if required, remove foreign
	age hose is kinked or
		bodies from the pump hous-
	the drain pump is blocked.
		ing.
Excessive foaming dur-	Probably too much detergent	Measure the detergent ex-
		actly in accordance with the
ing the main wash.	was used.	manufacturer's information.
	The screw connection on the	Tighten the inlet hose screw
	inlet hose is leaking.	connection.
	The drainage hose is leaking.	Check the drainage hose and
		replace it if necessary.
	The drain pump cover is not	Close cover correctly.
	correctly closed.
Water runs out from	Washing is caught in the	Stop the programme, remove
under the washing ma-		the washing caught in the
chine.	door.	door. Restart the programme.
		Close the emergency empty-
		ing hose correctly (see the
	The emergency emptying	section "Carry out emer-
	hose is not correctly closed	gency emptying“). Call your
	or is leaking.	local Service Force Centre if
		the emergency emptying
		hose leaks.

32