AEG 88730 manual What to do if, Trouble Shooting, Low

Page 31

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code C1 oder C2 is shown in the multi-display, you may be able to remedy the fault yourself (see the Fault table be-

low).

After clearing the fault, press the START/PAUSE button. If the fault code is shown again, contact your local Service Force Centre.

For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

Problem

Possible Cause

Remedy

 

The mains plug is not

Plug in the mains plug.

 

plugged in.

 

 

 

The house fuse has blown.

Replace the fuse.

The washing machine

The door is not correctly

Close the door; The lock must

does not work.

closed.

engage audibly.

 

 

START/PAUSE button not

Keep the START/PAUSE but-

 

ton pressed until the pro-

 

pressed long enough.

 

gramme begins.

 

 

The door cannot be

 

Cancel the child safety fea-

The child safety feature is set

ture (see Section "Child

closed.

 

Safety Feature“).

 

 

 

Water tap closed.

Open the water tap.

Water is not running.

 

Close the water tap. Unscrew

Filter in screw connection of

the hose from the tap, re-

Error code (1 ap-

the inlet hose is blocked.

move the filter and clean un-

pears.

 

der running water

 

Water tap is blocked with

Check water tap and have it

 

limescale or is faulty.

repaired if necessary.

 

 

 

31

Image 31
Contents ÖKO-LAVAMAT 88730 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control panelSilk / P hand wash Woollens / P hand washProgramme option buttons Run time display Consumption data and wash timesAnti-flood Aqua Control + Aqua Alarm What does Update mean?Preparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeSoaking duration Setting the delay timer/soaking durationDelay timer Changing the spin speed/Selecting Rinse HoldLoad the washing Opening and closing the doorAdding detergent / conditioner If using liquid detergent / tabletsAdd detergent / conditioner Conditioners Open the detergent dispenser drawerSTART/PAUSE button again Start the washing programmeIf the time preselection is set Changing the Spin Speed Washing Programme ProgressProgramme progress display Multi-displayWashing cycle complete/Removing the washing Not function if the power supply is interruptedRemove the washing Turn the programme selector to OFF Washing Programme tablesSeparate spin Separate rinse/conditioning/starchingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingLow Not been removed Turn off the tap, then re If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingSupply first When the water is completely drainedUnlock feature Emergency unlocking of the doorHelpful to rinse with extra water Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Additional Rinse and Water Cooling Setting the water cooling functionCancelling the water cooling function Water CoolingProgramme protection Cancelling programme protectionSelect programme protection Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionConnection to the machine Inlet Hose ConnectionWater Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG