AEG 76730 manual Set the Delay Timer/Soaking Duration

Page 21

Operating Instructions

Set the Delay Timer/Soaking Duration

 

Delay Timer

 

The button DELAY TIMER allows the start of a washing program to be

 

advanced by 1 to a maximum of 19 hours.

0

To do this, press the button DELAY TIMER as

 

often as necessary until the required start de-

 

 

 

 

 

 

 

lay is shown in the multidisplay, e.g.12h in the

 

form for a program start delay of 12 hours.

 

 

 

 

 

If19h is shown and you press again, 0h and af-

 

terwards the run time of the set washing

 

program appears (display in minutes, e.g.126).

 

In this state, the delay timer is not set.

3

Once the delay timer has been set, it will only be activated after press-

 

ing the START/PAUSE button.

 

Soaking Duration

 

With the SOAKING button pressed, you can extend the soaking dura-

 

tion with the button DELAY TIMER (maximum 10 hours and approx.

 

20 min.).

3

Without delay timer, the soaking duration is approx. 30 minutes, plus a

 

pre-wash time of approx. 20 minutes.

0To set, press the button DELAY TIMER as often as necessary until the re- quired soaking duration is shown in the multidisplay, e.g.1h

(= 1 hour).

After approx. 2 seconds, the multidisplay shows the run time in minutes.

This run time is comprised as follows:

 

selected soaking period

e.g.

1h =60 minutes

 

+ heating up/prewash period

e.g.

approx. 20 minutes

 

+ run time of the selected washing program e.g.

approx. 126 minutes

 

= displayed value

e.g.

approx. 206 minutes

3

While SOAKING is running, PRE WASH lights up on the program se-

 

quence display.

 

 

21

Image 21
Contents ÖKO-LAVAMAT 76730 update Dear Customer Tips on using the appliancePlease read this user information carefully Pass it on to any future owners of the unitContents Program Tables What to do ifWarranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use General Safety Safety of Children and Infirm PersonsDisposal Disposing of the Packaging MaterialDisposing of your old appliance Environmental tips Unit description Front viewDrawer for detergent and care agent Program Selector Control panelWOOL/P Handwash Main washing cycle for delicates at 30 C or 40 CHandwash Is added, spinAdditional Program Buttons Come effective at higher temperaturesWarm pre wash before the main washing cycle Shorter washing cycle for slightly dirty washingConsumption Values What does Update mean?Water Protection Aqua Control Filling Quantity Water EnergyBefore the First Wash Prepare washing cycleSort washing and prepare Washing Types and Care Codes How much washing detergent and care agent? Water softenerWater hardness details Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Tables Setting the Washing ProgramChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Set the Delay Timer/Soaking Duration Delay TimerSoaking Duration Add the washing Opening and Closing the Filling DoorFor the maximum filling quantities, see the Program tables Close the filling door securelyAdd Washing Detergent/Care Agent If using liquid detergent / tabletsCompartment for pre-wash agent/soaking agent Or for water softenerStart the Washing Program Is pressedIf the time preselection is set Completion of the Washing Program Program sequence displayMulti-display Changing or aborting a program Changing a Washing ProgramSelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing If the power supply is interruptedProgram Tables Care Codes TemperatureWashing Type of Washing MaxSeparate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Type of WashingDetergent Drawer Cleaning and CareMain door Washing DrumRemedying Faults Problem Possible Cause RemedyWhat to do if Water tap is closed Open the water tap No water runs Tighten the intake hose Head 1m from units floor If there are still grey spots on the washing If the washing results are not satisfactoryIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage Before cleaning the drain pump When the water is completely drainedDrain pump Ing pumped out, e.g. if the pump is blockedCancel Additional Rinse No additional rinse is set when the unit is deliveredAdditional Rinse RINSE+ To rinse with more waterChild Safety Feature Setting the child safety featureCancelling the child safety Feature Installation Safety Precautions Installation and connection instructionsWhen transporting the unit with a sack trolley Installation of the applianceTransporting the appliance Remove transport packagingCover the hole with the cap C Are supplied with itPrepare the installation place Installation on a concrete baseInstallation on vibrating floors Compensate for floor unevenness Electrical connection Water connectionPermissible water pressure Water inflow Delivery heads over 1m Water drainWater drain-off inside a siphon Water drain-off inside a basinDimensions Technical dataDimensions in mm = 0.1 1.0 MpaAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCroatia New Zealand Australia Korea South NamibiaBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanJapan Singapore Slovenia Israel Malaysia Saudi ArabiaThailand Slovakia Rep South Africa HungaryPage Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Related manuals
Manual 56 pages 44.61 Kb