Operating Instructions
Problem | Possible Cause | Remedy | |
| The screw connection on the | Tighten the intake hose | |
| intake hose is leaky. | screw connection. | |
| The drainage hose is leaky. | Check the drainage hose and | |
| replace it if necessary. | ||
|
| ||
| The washing solution pump | Close cover correctly. | |
| cover is not correctly closed. | ||
|
| ||
Water runs out under | Washing stuck in the filling | Stop the program, remove | |
the washing machine. | washing from the filling | ||
door. | |||
| door, start a new program. | ||
|
| ||
|
| Shut the emergency drain | |
| The emergency drain hose is | hose off properly (see section | |
| "Performing an Emergency | ||
| not properly shut off or it is | ||
| Drain"). Call your | ||
| not | ||
| service if the emergency | ||
|
| ||
|
| drain hose is not | |
|
|
| |
Fault code EF0 |
|
| |
appears. |
| Turn off the water tap, | |
The drain pump for the |
| ||
The Aqua Control | then remove the plug from | ||
washing machine runs | system has been activated. | the mains and inform | |
constantly - even when |
| Customer Service. | |
the appliance is |
|
| |
switched off. |
|
| |
Conditioner not added, | Softener insert in the com- | Clean the detergent drawer | |
compartment æfor | partment for care agent not | ||
and firmly attach the sof- | |||
care agent full of wa- | correctly attached or is | ||
tener insert. | |||
ter. | blocked. | ||
| |||
|
| Pay attention to the maxi- | |
Washing heavily | Too mush washing probably | mum filling quantity (see | |
Program Tables). For easy- | |||
creased. | put in. | ||
care textiles, select the pro- | |||
|
| ||
|
| gram EASY IRON. | |
The washing has not | The washing was not able to | Always load the drum as ful | |
been spun as dry as | be distributed evenly in the | as possible with a combina- | |
usual. | drum prior to spinning. | tion of large and small items. | |
|
|
|
34